Abstract
The grain boundary fracture surfaces of several Ir + 0.3 pct W alloys have been examined using Auger electron spectroscopy. Dopant additions (between 10 and 80 wt ppm) of Al, Fe, Th, Ni and Rh are shown to result in thorium enriched grain boundaries. Inert ion sputtering experiments suggest that the thorium enriched region at the grain boundaries is probably only a few atom layers thick. The other dopants (Al, Fe, Ni and Rh) do not appear to influence the segregation of thorium, and their function (if any) in improving the high temperature impact properties of this alloy is unclear at this time.
Similar content being viewed by others
References
C. T. Liu and H. Inouye:Development and Characterization of an Improved Ir-0.3% W Alloy for Space Radioisotopic Heat Sources, ORNL-5290, 1977.
C. T. Liu and H. Inouye:Proceedings of the Second International Conference on Mechanical Behavior of Materials, pp. 1149–53, American Society for Metals, Metals Park, Ohio, 1976.
C. T. Liu:Isotopic Power Materials Quarterly Progress Report for Period EndingMarch 31,1976, ORNLJTM-5285, pp. 38–40,1976, available from NTIS, U.S.Department of Commerce, Springfield, Virginia.
C. T. Liu:Isotopic Power Materials Quarterly Progress Report for Period Ending March 31, 1976, ORNLJTM-5482, pp. 25–28, 1976, available from NTIS, U.S. Department of Commerce, Springfield, Virginia.
C. T. Liu:Isotopic Power Materials Quarterly Progress Report for Period Ending June 30, 1976, ORNLJTM-5569, pp. 17–19,1976, Available from NTIS, U.S. Department of Commerce, Springfield, Virginia.
D. F. Stein, W. C. Johnson, and C. L. White:Can. Met. Quarter., 1974, vol. 13, no. 1, p. 79.
D. F. Stein, W. C. Johnson, and C. L. White:Grain Boundary Structure and Properties, G. A. Chadwick and D. A. Smith, ed., pp. 301–51, Academic Press, London, 1976.
L. E. Davis, N. C. MacDonald, P. W. Palmberg, G. E. Riach, and R. E. Weber:Handbook of Auger Electron Spectroscopy, 2nd ed., pp. 5–18, Physical Electronics Industries, Eden Prairie, MN, 1976.
G. K. Wehner:Methods of Surface Analysis, A. W. Czanderna, ed., pp. 5–37, Elsevier, New York, 1975.
E. N. Sickafus:J. Vac. Sci. Technol, 1974, vol. 11, no. 1, pp. 299–311.
R. W. Douglass, C. A. Krier, and R. I. Jaffee: Battelle Memorial Institute Report NP-10939, August 1961.
C. A. Brooks, J. H. Greenwood, and J. L. Routbort;J. Appl. Phys., 1968, vol. 39, pp. 2391–95.
S. S. Hecker, D. L. Rohr, and D. F. Stein:Met. Trans. A, 1978, vol. 9A, pp. 481–88.
F. C. Holden, R. W. Douglass, and R. I. Jaffee:Symposium on Newer Metals, pp. 68–79, ASTM-STP-272, 1960.
R. W. Douglass and R. I. Jaffee:Proc. ASTM, 1967, vol. 62, pp. 627–37.
C. T. Liu and H. Inouye:Study of Iridium and Iridium-Tungsten Alloys for Space Radioisotopic Heat Sources, ORNL-5240, 1976, available from NTIS, U.S. Department of Commerce, Springfield, Virginia.
H. Hieber, B. L. Mordike and P. Haasen:Plat. Met. Rev., 1964, vol. 8, pp. 102–06.
C. A. Brookes, H. J. Greenwood, and R. L. Routbort:J. Inst. Met., 1970, vol. 98, pp. 27–31.
L. E. Murr and O. T. Inal:Met. Eng. Quart., pp. 29–34, August 1972.
L. E. Murr, O. T. Inal, and G. I. Wong:Electron Microscopy and Structure of Materials; G. Thomas, R. M. Fulrath, and R. M. Fisher, eds., p. 417, University of California Press, Berkeley, CA, 1972.
P. S. Sklad, R. E. Clausing, and E. E. Bloom: ASTM STP 611, pp. 139–55, American Society for Testing and Materials, 1976.
R. E. Clausing and E. E. Bloom:Proc. Fourth Bolton Landing Conf, J. L. Walter, J. H. Westbrook, and D. A. Woodford, eds., pp. 491–503, Claitors Publishing Div. Baton Rouge, LA 1975.
R. D. McLellan and W. A. Oates:Acta Met, 1973, vol. 21, pp. 181–85.
D. A. Smith, T. F. Page, and B. Ralph:Philos. Mag., 1969, vol. 19, pp. 231–40.
C. N. Reid and J. L. Routbort:Met. Trans., 1972, vol. 3, pp. 2257–60.
A. Kelly, W. R. Tyson, and A. H. Cottrell:Philos. Mag., 1974, vol. 29, pp. 73–97.
E. D. Hondros and D. McLean:Grain Boundary Structure and Properties, G. A. Chadwick and D. A. Smith, eds., pp. 353–81, Academic Press, London, 1976.
D. McLean:Grain Boundaries in Metals, pp. 116–49, Clarendon Press, Oxford, 1957.
E. D. Hondros:J. De Physique, October 1975, Tome 36, Coll. C-4 Suppl. No. 10, pp. 117–34.
D. F. Stein, A. Joshi, and R. P. LaForce:Trans. ASM, 1969, vol. 62, pp. 776–83.
P. V. Ramasubramanian and D. F. Stein:Met. Trans., 1973, vol. 4, pp. 1735–42.
A. Joshi and D. F. Stein:Met. Trans., 1970, vol. 1, pp. 2543–46.
A. Joshi and D. F. Stein:J. Inst. Metals, 1971, vol. 99, pp. 178–81.
J. R. Low:Trans. TMS-AIME, 1969, vol. 245, pp. 2481–94.
J. E. Doherty, A. F. Giamei, and B. H. Kear:Can. Met. Quart., 1974, vol. 13(1), pp. 229–36.
W. C. Johnson, J. E. Doherty, B. H. Kear, and A. F. Gaimei:Scripta Met, 1974, vol. 8, pp. 971–74.
R. F. Decker and C. T. Sims:The Superalloys, C. T. Sims and C. Hagel, eds., p. 64, John Wiley and Sons, New York, 1972.
M. P. Seah:Proc. Roy. Soc. London, 1976, vol. A349, pp. 535–54.
A. Joshi and D. F. Stein:Met. Trans., 1970, vol. 1, pp. 2543–46.
A. W. Thompson: “Grain Boundaries in Engineering Materials,”Proc. Fourth Bolton Landing Conf, J. L. Walter, J. H. Westbrook, and D. A. Woodford, eds., pp. 607–18, Claitors Publishing Division, Baton Rouge, LA, 1974.
L. White and D.F. Stein,Met. Trans. A, 1978, vol. 9A, pp. 13–22.
D. D. Mason:Segregation Induced Embrittlement of Grain Interfaces, USERDA E(l 1-1)8084J52, 1977, M.S. thesis, Brown University, Providence, RI.
J. R. Rice:Effect of Hydrogen on Behavior of Materials, A. W. Thompson and I. M. Bernstein, eds., pp. 5–37, TMS-AIME, New York, 1976.
C. J. Smithells:Metals Reference Book, vol. 1, fourth edition, pp. 140–41, Plenum Press, New York, 1967.
F. A. Shunk:Constitution of Binary Alloys, Second Supplement, p. 466, McGraw-Hill, New York, 1969.
C. L. White: unpublished research, Oak Ridge National Laboratory, Oak Ridge, TN, 1978.
M. Hansen:Constitution of Binary Alloys, 2nd edition, p. 662, McGraw-Hill, New York, 1958.
W. G. Moffatt:Binary Phase Diagrams Handbook, General Electric, New York, 1976.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
White, C.L., Clausing, R.E. & Heatherly, L. The effect of trace element additions on the grain boundary composition of Ir + 0.3 pct W alloys. Metall Trans A 10, 683–691 (1979). https://doi.org/10.1007/BF02658389
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02658389