Abstract
The origin of freckles during unidirectional solidification is studied in a transparent, low melting model system, 30 wt pct NH4C1-H2O. In 30NH4Cl-H2O, freckles are caused by upward flowing liquid jets in the mushy zone. The jets erode the mushy zone causing localized segregation and start new grains by producing dendritic debris. It is shown that the jets observed in 30NH4C1-H2O are free convection resulting from a density inversion in the mushy zone. A comparison of driving force, thermal transport effects and solute transport effects in 30NH4C1-H2O and metallic systems shows that jets are possible in metallic alloys where light elements segregate normally or heavy elements segregate inversely. It is concluded that freckles in unidirectionally solidified castings and vacuum consumable-electrode ingots are caused by convective jets. It is shown that the tendency to freckle is greatest in alloys with a large density inversion, high thermal diffusivity, low solute diffusivity, and low viscosity. For a given alloy, the driving force for freckling is proportional to the inverse square of the thermal gradient. Erosion by the jets is decreased by increasing the thermal gradient and growth rate. The location of freckles is influenced by mushy zone curvature.
Similar content being viewed by others
References
A. F. Giamei and B. H. Kear:Met. Trans., 1970, vol. 1, pp. 2185–91.
C. E. Smeltzer:Iron Age, 1959, vol. 184, pp. 188–89.
G.C. Gould:Trans. TMS-AIME, 1965,vol. 233,pp. 1345–51.
R. P. DeVries and G. P. Mumau:J. Metals, November 1968, vol. 20, pp. 33–36.
J. Preston: International Transactions Vacuum Metallurgy Conference, E. L. Foster, ed., American Vacuum Society, New York, 1968.
K.A. Jackson and J.D. Hunt:Acta Met., 1965,vol. 13, pp. 1212–15.
K. A. Jackson, J. D. Hunt, D. R. Uhlmann, and T. P. Seward, III:Trans. TMS-AIME, 1966, vol. 236, pp. 149–58.
International Critical Tables of Numerical Data, Physics, Chemistry and Technology: 1928, vol. 3, p. 60; vol. 4, p. 218.
S. M. Copley, A. F. Giamei, S. M. Johnson, and M. F. Hornbecker:J. Metals, March 1969, vol. 21, p. 110A; the movie is available on loan from the Advanced Materials Research and Development Laboratory, Pratt & Whitney Aircraft, Middletown, Conn. 06457.
J. S. Turner and H. Stommel:Proc. Nat’l. Acad. Sci., 1964, vol. 52, pp. 49–53.
M. E. Stern:Tellus, 1960, vol. 12, pp. 172–75.
H. Stommel, A. B. Arons, and D. Blanchard:Deep Sea Res., 1956, vol. 3, pp. 152–53.
E. Scheil:Metallforschung, 1947, vol. 2, p. 69.
J. S. Kirkaldy and W. V. Youdelis:AIME Trans., 1958, vol. 212, p. 833.
M. C. Flemings and G. E. Nereo:Trans. TMS-AIME, 1967, vol. 239, pp. 1449–61.
M. C. Flemings, R. Mehrabian and G. E. Nereo:Trans. TMS-AIME, 1968, vol. 242, pp. 41–49.
M. C. Flemings and G. E. Nereo:Trans. TMS-AIME, 1968, vol. 242, pp. 50–55.
M. Hansen and K. Anderko:Constitution of Binary Alloys, 2nd ed., p. 119, McGraw-Hill Book Co., New York, 1958.
B. J. Piearcey, B. H. Kear, and R. W. Smashey:Trans. ASM, 1967, vol. 60, pp. 634–45.
H. R. Thresh:J. Inst. Metals, 1968, vol. 96, pp. 308–13.
A. F. Giamei: Advanced Materials Research and Development Laboratory, Pratt & Whitney Aircraft, Middletown, Connecticut 06457.
International Critical Tables of Numerical Data, Physics, Chemistry, and Technology: 1928, vol. 5, p. 7.
Handbook of Physics and Chemistry: 43rd ed., p. 2211, The Chemical Rubber Publishing Co., Cleveland, Ohio, 1961.
Thermophysical Properties Research Center Data Book: 1966,vol. 1,MetallicElementsand Their Alloys, Purdue University, Lafayette, Indiana.
Thermophysical Properties Research Center Data Book: 1966, vol.2, Nonmetallic Elements, Compounds, and Mixtures.
B. Chalmers:Principles of Solidification, p. 133, John Wiley and Sons, New York, 1964.
J. Frenkel:Kinetic Theory of Liquids, p. 201, Dover Publications, Inc., New York, 1955.
S. Chandrasekhar:Hydrodynamic and Hydromagnetic Instability, Oxford University Press, London, 1961.
G. Veronis:Astrophys. J., 1963, vol. 137, pp. 641–63.
R. S. Cremisio: International Transactions Vacuum Metallurgy Conference, E. L. Foster, ed., American Vacuum Society, New York, 1968.
R. J. McDonald and J. D. Hunt:Trans. TMS-AIME, 1969, vol. 245, pp. 1993–97.
Author information
Authors and Affiliations
Additional information
Formerly Research Assistant at the Advanced Materials Research and Development Laboratory
An erratum to this article is available at http://dx.doi.org/10.1007/BF03037879.
Rights and permissions
About this article
Cite this article
Copley, S.M., Giamei, A.F., Johnson, S.M. et al. The origin of freckles in unidirectionally solidified castings. Metall Trans 1, 2193–2204 (1970). https://doi.org/10.1007/BF02643435
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF02643435