Abstract
The response time of thermocouples is generally considered to be a limiting factor when transient temperature changes need to be assessed in solids. As an example, transient temperature changes which develop during dynamic straining of materials, adiabatic shear band formation, dynamic fracture and related fields are often investigated using sophisticated noncontact measurement techniques such as infrared detectors. In these phenomena, the time scale is of the order of the microsecond. In this paper, the authors revisit the application of thermocouples to such measurements using small embedded thermocouples (ETC). Experiments with dynamically loaded polymeric disks (characteristic strain rate of 103 s−1) show that the thermocouples record transient temperatures with a short typical rise time of 10 μs as a result of the conversion of plastic deformation into heat. This observation is corroborated by the solution of the temperature distribution in a sphere subject to constant surface temperature which predicts the same fast reaction. Specifically, considering a sphere which is representative of the sensing bead, the average temperature is shown to rise in a few microseconds. These theoretical results can be used to deconvolve the experimental results with respect to a calculated impulse response of the sensor to recover the actual temperature variations. The results show that small thermocouples can be embedded to yield useful information about the transient temperature evolution in a solid. This technique is easy to use and provides an important complement to other noncontact techniques.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Taylor, G.I. andQuinney, H., “The Latent Energy Remaining in a Metal After Cold Working,”Proc. Roy. Soc. A,143,307–326 (1934).
Dillon, O.W., Jr., “Coupled Thermoplasticity,”J. Mech. Phys. Solids,11,21–33 (1963).
Dillon, O.W., Jr. andTauchert, T.R., “The Experimental Technique for Observing the Temperatures Due to the Coupled Thermoelastic Effects,”Int. J. Solids Struct.,2,385–391 (1966).
Rauch, B.J. andRowlands, R.E., “Thermoelastic Stress Analysis,” Handbook on Experimental Mechanics, 2nd ed., ed. A.S. Kobayashi, SEM VCH, New York (1993).
Zehnder, A.T. andRosakis, A.J., “On the Temperature Distribution at the Vicinity of Dynamically Propagating Cracks in 4340 Steel,”J. Mech. Phys. Solids,39 (3),385–415 (1991).
Marchand, A. andDuffy, J., “An Experimental Study of the Formation Process of Adiabatic Shear Bands in a Structural Steel,”J. Mech. Phys. Solids,36 (3),251–283 (1988).
Zhou, M., Rosakis, A.J., andRavichandran, G., “Dynamically Propagating Shear Bands in Impact-loaded Prenotched Plates. I—Experimental Investigations of Temperature Signatures and Propagation Speed,”J. Mech. Phys. Solids,44 (6),981–1006 (1996).
Wally, K., “The Transient Response of Beaded Thermocouples Mounted on the Surface of a Solid,”ISA Transactions,17 (1),65–70 (1978).
Bendersky, D., “A Special Thermocouple for Measuring Transient Temperatures,” Mech. Eng., 117–121 (Feb. 1953).
Shockey, D.A., Kalthoff, J.F., Klemm, W., andWinkler, S., “Simultaneous Measurements of Stress Intensity and Toughness for Fast Running Cracks in Steel,” EXPERIMENTAL MECHANICS,23,140–145 (1983).
Döll, W., “Application of an Energy Balance and an Energy Method to Dynamic Crack Propagation,”Int. J. Fract.,12 (4),595–605 (1976).
Fuller, K.N.G., Fox, P.G., andField, J.E., “The Temperature Rise at the Tip of a Fast-moving Crack in Glassy Polymers,”Proc. Roy. Soc. A,341,537–557 (1975).
Chou, S.C., Robertson, K.D., andRainey, J.H., “The Effect of Strain Rate and Heat Developed During Deformation on the Stress-strain Curve of Plastics,” EXPERIMENTAL MECHANICS,13,422–432 (1973).
Trojanowski, A., Ruiz, C., andHarding, J., “Thermomechanical Properties of Polymers at High Rates of Strain,”J. Physique, colloque C 3, 447–452 (1997).
Carslaw, H.S. andJaeger, J.C., Conduction of Heat in Solids, Oxford University Press, Oxford (1959).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rittel, D. Transient temperature measurement using embedded thermocouples. Experimental Mechanics 38, 73–78 (1998). https://doi.org/10.1007/BF02321647
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/BF02321647