Literature cited
G. C. Eckold, D. Leadbetter, P. D. Soden, and P. R. Griggs, “Lamination theory in the prediction of failure envelopes for filament wound materials subjected to biaxial loading,” Composites,9, No. 4, 243–247 (1978).
V. D. Protasov, A. F. Ermolenko, A. A. Filipenko, and I. P. Dimitrienko, “Study of the load-carrying capacity of laminated cylindrical shells by modeling the failure process on a computer,” Mekh. Kompozitn. Mater., No. 2, 254–261 (1980).
V. N. Bulmanis, “Variant of a structural model of the failure of reinforced filament-wound composites,” in: Mechanics of Structures Made of Composite Materials [in Russian], Novosibirsk (1984), pp. 28–31.
V. V. Vasil'ev and A. N. Elpat'evskii, “Features of the deformation of cylindrical shells, wound from unidirectional glass-fiber-reinforced roving, when subjected to internal pressure,” Mekh. Polim., No. 5, 915–920 (1967).
S. F. Kuznetsov and V. V. Partsevskii, “Mechanism of the deformation and failure of laminated multidirectional composites,” Mekh. Kompozitn. Mater., No. 6, 1006–1011 (1981).
N. A. Alfutov, M. A. Zinov'ev, and B. G. Popov, Design of Multilayered Plates and Shells Made of Composites [in Russian], Moscow (1984).
M. Uemura and H. Fukunaga, “Probabilistic burst strength of filament wound cylinders under internal pressure,” in: Composite Materials, Barking (1981), pp. 418–427.
A. Rotem, “Fatigue failure mechanism of composite laminates,” in: Mechanics of Composite Materials, New York (1983), pp. 421–435.
S. R. Swanson and A. P. Christoforou, “Progressive failure in carbon/epoxy laminates under biaxial stress,” J. Eng. Mater. Techno1.,109, No. 1, 12–16 (1987).
V. V. Partsevskii, “Moment effects in a plane problem for an angle-ply laminate,” Mekh. Kompozitn. Mater., No. 1, 46–50 (1979).
A. Rotem and Z. Hashin, “Fatigue failure of angle-ply laminates,” AIAA J.,14, No. 7, 868–872 (1976).
V. G. Perevozchikov, V. A. Limonov, V. D. Protasov, and V. P. Tamuzh, “Static and fatigue strength of unidirectional composites under the combined influence of shear and transverse tension-compression,” Mekh. Kompozitn. Mater., No. 5, 845–851 (1988).
Z. Hashin and A. Rotem, “A fatigue failure criterion for fiber reinforced materials,” J. Compos. Mater.,7, No. 5, 443–464 (1973).
A. K. Malmeister, V. P. Tamuzh, and G. A. Teters, Strength of Rigid Polymers [in Russian], Riga (1967).
Yu. N. Rabotnov, “Strength of composites reinforced in two directions,” Mekh. Polim., No. 5, 832–834 (1978).
A. N. Polilov, “Method of calculating the strength of angle-ply composites in a plane stress state,” Mekh. Kompozitn. Mater., No. 2, 221–226 (1980).
V. A. Limonov, V. G. Perevozchikov, and V. P. Tamuzh, “Fatigue of laminated composites with different reinforcement schemes. 1. Experimental results.” Mekh. Kompozitn. Mater., No. 5, 786–796 (1988).
B. Spencer and D. Hull, “Effect of winding angle on the failure of filament wound pipe,” Composites,9, No. 4, 263–272 (1978).
Yu. N. Rabotnov, I. N. Danilova, A. N. Polilov, T. V. Sokolova, I. S. Karpeikin, and M. V. Vainberg, “Study of the strength of filament wound epoxy carbon- and glass-fiber plastics in torsion, tension, and transverse bending,” Mekh. Polim., No. 2, 219–225 (1978).
Ya. A. Anderson, V. A. Limonov, V. P. Tamuzh, and V. G. Perevozchikov, “Fatigue of laminated composites with difference reinforcement schemes. Report No. 2. Plane stress state and theoretical model,” Mekh. Kompozitn. Mater., No. 4, 608–616 (1989).
Author information
Authors and Affiliations
Additional information
Translated from Mekhanika Kompozitnykh Materialov, No. 2, pp. 231–236, March–April, 1990.
Rights and permissions
About this article
Cite this article
Anderson, Y.A., Limonov, V.A. & Tamuzh, V.P. Failure during axial loading of a plastic reinforced at oblique angles with organic fibers. Mech Compos Mater 26, 182–187 (1990). https://doi.org/10.1007/BF00612317
Received:
Issue Date:
DOI: https://doi.org/10.1007/BF00612317