Shape Optimization of Uniaxial Vibrating Metal Damper

Ji-Hoon Yoon; Ji-Woon Park; Yun-Mook Lim; Gil-Ho Yoon

doi:10.7734/COSEIK.2017.30.4.313

All Issue

2017 Vol.30, Issue 4 Preview Page Next Page

Shape Optimization of Uniaxial Vibrating Metal Damper 일축 진동형 금속제진장치 형상 최적설계

2017. pp. 313-318

PDF XML

Abstract

This study performs the structural analysis and the optimum design of a vibrating metal damper to absorb vibration energy. Unlike other dampers such as rubber bearing, friction or viscose dampers, the present vibrating metal damper utilizes the plastic deformation of a steel and its associated hysteresis phenomenon to reduce vibrations of structures. To optimize this vibrating metal damper, it is important to obtain plastic deformation through the damper. To achieve this, the shape optimization method is developed and applied to find out optimal envelopes of the metal damper. Depending on the parameterization scheme, some novel optimal shapes can be found.

Keywords

structural analysis

optimum design

damping system

ABAQUS

본 연구는 진동에너지를 흡수하기 위한 진동 금속 댐퍼의 구조 해석과 최적 설계를 수행한다. 고무 베어링, 마찰 또는 점성 댐퍼와 같은 다른 댐퍼와는 달리 이 금속제진장는 금속의 소성 변형과 그에 따른 히스테리시스 현상을 이용하여 구조물의 진동을 감소시킨다. 이 금속제진장치를 최적화 하려면 댐퍼를 통해 소성 변형을 얻는 것이 중요하다. 금속제진장치의 최적화 된 형상을 찾기 위해 형상 최적화 방법을 적용하였다. 또한 매개 변수화 체계에 따라 일부 최적의 모양을 찾을 수 있다.

키워드

구조해석

최적설계

금속제진장치

References

References

KM Choi, HJ Jung, SW Cho and IW Lee, J. Mech. Sci. & Tech, Application of Smart Passive Damping System using MR Damper to Highway Bridge Structure, 21(6); 870-874 (2007)

10.1007/BF03027060

K Deng, P Pan, J Sun, J Liu and Y Xue, J. Construct. Steel Res, Shape Optimization Design of Steel Shear Panel Dampers, 99; 187-193 (2014)

K Deng, P Pan and C Wang, J. Construct. Steel Res, Development of Crawler Steel Damper for Bridges, 85; 140-150 (2013)

10.1016/j.jcsr.2013.03.009

JM Kelly, Earthq. Eng. & Struct. Dyn, The Role of Damping in Seismic Isolation, 28(1); 3-20 (1999)

https://dx.doi.org/10.1002/(SICI)1096-9845(199901)28:1<3::AID-EQE801>3.0.CO;2-D

DH Kim, Noise & Virb. Eng, Development Status of Seismic Isolation Technology for Structures Considering Earthquakes, 5(1); 11-20 (1995)

ES Kim, Korea Ist. Struct. Maint. & Insp, Field Survey about Seismic Retrofit of Existing Building in San Francisco, 17(4); 68-73 (2013)

SH Lee and EJ Yu, J. Comput. Struct. Eng. Inst. Korea, Model Updating of a RC Frame Building using Response Surface Method and Multiobjective Optimization, 30(1); 39-46 (2017)

10.7734/COSEIK.2017.30.1.39

N Makris and J Zhang, J. Struct. Eng, Seismic Response Analysis of a Highway Overcrossing Equipped with Elastomeric Bearings and Fluid Dampers, 130(6); 830-845 (2004)

10.1061/(ASCE)0733-9445(2004)130:6(830)

S Nagai, T Kaneko, Kanda and M Maruta, In 6th International RILEM Symposium on Fibre Reinforced Concretes (1227-1236), Structural Capacity of Reinforced PVA-ECC Dampers (2004)

M Nakashima, K Saburi and B Tsuji, Earthquake Engineering & Structural Dynamics, Energy Input and Dissipation behaviour of Structures with Hysteretic Dampers, 25(5); 483-496 (1996)

https://dx.doi.org/10.1002/(SICI)1096-9845(199605)25:5<483::AID-EQE564>3.0.CO;2-K

M Ohsaki and T Nakajima, J. Construct. SteelRes, Optimization of Link Member of Eccentrically Braced Frames for Maximum Energy Dissipation, 75; 38-44 (2012)

10.1016/j.jcsr.2012.03.008

Information

Publisher :Computational Structural Engineering Institute of Korea
Publisher(Ko) :한국전산구조공학회
Journal Title :Journal of the Computational Structural Engineering Institute of Korea
Journal Title(Ko) :한국전산구조공학회 논문집
Volume : 30
No :4
Pages :313-318
Received Date : 2017-06-22
Revised Date : 2017-07-20
Accepted Date : 2017-08-09
DOI :https://doi.org/10.7734/COSEIK.2017.30.4.313

Journal of the Computational Structural Engineering Institute of Korea ISSN:1229-3059(Print) 2287-2302(Online) 한국전산구조공학회 논문집

All Issue

References