|
Digital Library of the
European Council for Modelling and Simulation |
Title: |
Controlled Switching – Solution For Reducing The Overvoltages At Commutation Of The Transport And Distribution Lines |
Authors: |
Virginia I. Ivanov, Maria D. Brojboiu, Sergiu Ivanov |
Published in: |
(2009).ECMS
2009 Proceedings edited by J. Otamendi, A. Bargiela, J. L. Montes, L. M.
Doncel Pedrera. European Council for Modeling and Simulation. doi:10.7148/2009 ISBN: 978-0-9553018-8-9 23rd
European Conference on Modelling and Simulation, Madrid, June
9-12, 2009 |
Citation
format: |
Ivanov, V., Brojboiu, M. D., &
Ivanov, S. (2009). Controlled Switching – Solution For Reducing The
Overvoltages At Commutation Of The Transport And Distribution Lines. ECMS
2009 Proceedings edited by J. Otamendi, A. Bargiela, J. L. Montes, L. M. Doncel Pedrera (pp. 751-755). European Council for
Modeling and Simulation. doi:10.7148/2009-0751-0755 |
DOI: |
http://dx.doi.org/10.7148/2009-0751-0755 |
Abstract: |
Recently,
worldwide, the controlled switch became a technical solution for reducing the
switching stress. After 90es, the number of equipment which
uses the controlled switch fast increased, mainly due to the achieved
performances. The controlled switching can be
applied to any type of commutations. Now there are dedicated controllers which are used more often for the switching of
the transport and distribution lines, of the small inductive loads, of the
capacitors batteries, or the energizing the no load power transformers. The
paper deals with the simulation of the commutation of a transportation line
by using the distributed parameters model. The controlled switch of the line
is compared with the uncontrolled one, highlighting the major differences in
what concerns the stress. |
Full
text: |