DOI QR코드

DOI QR Code

EFFECT OF EXIT SHAPE ON TURBULENT OUTFLOWS IN A DISTRIBUTION MANIFOLD

유량분배 매니폴드의 유출유동에 대한 출구형상 영향 해석

  • Lee, Joon Woo (School of Mechanical Engineering, Kyungpook Nat'l Univ.) ;
  • Park, Tae Seon (School of Mechanical Engineering, Kyungpook Nat'l Univ.)
  • 이준우 (경북대학교 기계공학부) ;
  • 박태선 (경북대학교 기계공학부)
  • Received : 2014.03.04
  • Accepted : 2014.03.21
  • Published : 2014.03.31

Abstract

Three-dimensional turbulent flows of a distribution manifold are studied by a turbulence model. To investigate the geometrical effects of the manifold, the length and area of exit port are changed. From the results, flow structures related to the outflow uniformity are examined and the deparure angles are obtained. The exit configuration depending on the departure angle has advantages to the outflow uniformity. That is, the decreased exit area in the streamwise direction improves the uniformity of exit flow. For the uniform effusion, the change of exit port by departure angle is more effective them the change of exit area.

Keywords

References

  1. 2009, Chen, A.W. and Sparrow, E.M., "Systematic approaches for design of distribution manifolds having the same per-port outflow," ASME Journal of Fluids Engineering, Vol.131, pp.061101-1-061101-9. https://doi.org/10.1115/1.3111256
  2. 2008, Yeol, Y.H., Kim, D.H., Lee, K.S. and Cha, W.H., "Flow distribution in manifold using modified equal pressure method," Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol.21, pp.176-185.
  3. 2009, Chen, A.W. and Sparrow, E.M., "Effect of exit-port geometry on the performance of a flow distribution manifold," Applied Thermal Engineering, Vol.29, pp.2689-2692. https://doi.org/10.1016/j.applthermaleng.2008.12.035
  4. 2008, Hassan, J.M., AbdulRazzaq, A. and Kamil, B.K., "Flow distribution in manifolds," Journal of engineering and Development, Vol.12(4), pp.159-177.
  5. 1971, Bajura, R.A., "A model for flow distribution in manifolds," ASME Journal of Engineering for power, Vol.93(1), pp.7-12. https://doi.org/10.1115/1.3445410
  6. 2009, Chen, A.W. and Sparrow, E.M., "Turbulence modeling for flow in a distribution manifold," International Journal of Heat and Mass Transfer, Vol.52, pp.1573-1581. https://doi.org/10.1016/j.ijheatmasstransfer.2008.08.006
  7. Fluent User's Manual, Version 6.2.

Cited by

  1. Evaluation on the Performance of Automobile Engine Using Air Injection Nozzle in the Intake Manifold vol.14, pp.24, 2021, https://doi.org/10.3390/en14248555