메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터

주제분류

정기구독(개인)

소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.

회원혜택

로그인 회원이 가져갈 수 있는 혜택들을 확인하고 이용하세요.

아카루트

학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.

영문교정

영문 논문 작성에 도움을 드리기 위해, 영문 교정 서비스를
지원하고 있어요.

고객센터 제휴문의

...

저널정보

저자정보

표지
이용수
내서재
1
내서재에 추가
되었습니다.
내서재에서
삭제되었습니다.

내서재에 추가
되었습니다.
내서재에서
삭제되었습니다.

초록·키워드

오류제보하기
The floor structure of the floor radiant heating system of most apartment houses in Korea adopts the standard floor structure advised by the Ministry of Land, Infrastructure, and Transport in order to resolve the noise dispute between floors. In such a floor structure, when the supply of hot water is stopped when the heat storage part of the mortar is shortened during intermittent heating, the surface temperature drops rapidly and it is difficult to expect a continuity in the temperature level. In order to resolve this problem, PCM with excellent heat storage performance was added to the floor radiant heating system. In addition, an optimal PCM insertion location was proposed in order to show more efficient heat storage performance. Two mock-up laboratories have been established to compare the heat storage performance of a standard floor radiant heating system and a PCM applied floor radiant heating system. The PCM was inserted at the top, side, and bottom of the hot water pipe and the temperature change was measured through the introduction of a heating schedule. The experiment confirmed that when the PCM was inserted at the bottom of the hot water pipe, the rising rate and persistence of the floor surface temperature and indoor temperature were higher than that of the general room, making it advantageous to insert the PCM at the bottom.

목차

Abstract
1. 연구배경 및 목적
2. Mock-up 실험실 구축
3. 실험 결과
4. 결론
References

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0