[1]
M. Saito, A. Maruoka, T. Mori, N. Sugano, K. Hino, Experimental studies on a new bioactive bone cement: hydroxyapatite composite resin. Biomaterials, 15 (1994) 156–60.
DOI: 10.1016/0142-9612(94)90266-6
Google Scholar
[2]
E.J. Harper, Bioactive bone cements. Proc. Inst. Mech. Eng. 212 (1998) 113–20.
Google Scholar
[3]
D. Ikeda, M. Saito, A. Murakami, T. Shibuya, K. Hino, T. Nakashima, Mechanical evaluation of a bio-active bone cement for total hip arthroplasty. Med Biol Eng Comput., 38 (2000) 401–5.
DOI: 10.1007/bf02345009
Google Scholar
[4]
V. Deram, C. Minichiello, R.N. Vannier, A. Le Maguer, L. Pawlowski, D. Murano, Microstructural characterizations of plasma sprayed hydroxyapatite coatings. Surface and Coatings Technology, 166 (2/3) (2003) 153−159.
DOI: 10.1016/s0257-8972(02)00855-1
Google Scholar
[5]
X. Wang, J. Wang, Y. Li, J. Feng, Y. Yan, M. Huang, A. Yang, Preparation of nanograde hydroxyapatite needle-like crystals under normal atmospheric pressure. High Technology Letters, 11 (2001) 92−94.
Google Scholar
[6]
J. Cizek, K.A. Khor, Z. Prochazka, Influence of spraying conditions on thermal and velocity properties of plasma sprayed hydroxyapatite. J. Mater. Sci. Eng. C., 27 (2) (2007) 340−344.
DOI: 10.1016/j.msec.2006.05.002
Google Scholar
[7]
L.L. Hench, Biomaterials: A forecast for the future. Biomaterials; 19 (1998) 1419–1423.
DOI: 10.1016/s0142-9612(98)00133-1
Google Scholar
[8]
L.L. Hench, R.J. Splinter, W.C. Allen, T.K. Greenlee, Bonding mechanisms at the interface of ceramic prosthetic materials. J. Biomed Mater Res Symp, 2 (1971) 117-41.
DOI: 10.1002/jbm.820050611
Google Scholar
[9]
T. Kokubo, Surface chemistry of bioactive glassceramics. J. Non-Cryst. Solids, 120 (1990a) 138-51.
Google Scholar
[10]
T. Kokubo, H. Kushitani, S. Sakka, T. Kitsugi, T. Yamamuro, Soultions able to reproduce in vivo surface-structure changes in bioactive glassceramic A-W. J. Biomed. Mater. Res., 24 (1990b) 721-34.
DOI: 10.1002/jbm.820240607
Google Scholar
[11]
T. Jaakkola, J. Rich, T. Tirri, T. Närhi, M. Jokinen, J. Seppälä, A. Yli-Urpo, In vitro Ca-P precipitation on biodegradable thermoplastic composite of poly(ε-caprolactone-co-DL-lactide) and bioactive glass (S53P4). Biomaterials, 25 (2004) 575-81.
DOI: 10.1016/s0142-9612(03)00558-1
Google Scholar
[12]
T. Niemelä, H. Niiranen, M. Kellomäki, P. Törmälä, Self-reinforced composites of bioabsorbable polymer and bioactive glass with different bioactive glass contents. Part I: Initial mechanical properties and bioactivity. Acta Biomaterialia 1, 1 (2005).
DOI: 10.1016/j.actbio.2004.11.002
Google Scholar
[13]
M. Brink, Bioactive glasses with a large working range. PhD Thesis, Abo Akademi University, Finland, (1997).
Google Scholar
[14]
T. Kokubo, H.M. Kim, F. Miyaji, H. Takadama, T. Miyazaki, Ceramic-metal and ceramic-polymer composites prepared by a biomimetic process. Composites Part A: Applied Science and Manufacturing, 30(4) (1999) 405−409.
DOI: 10.1016/s1359-835x(98)00127-4
Google Scholar
[15]
T. Kokubo, H. Kushitani, S. Sakka, T. Kitsugi, T. Yamamuro, Solution able to reproduce in vivo surfacestructure changes in bioactive glass-ceramic A-W. Journal of Biomedical Materials Research, , 24 (6) (1990) 721−734.
DOI: 10.1002/jbm.820240607
Google Scholar