p.257
p.263
p.269
p.274
p.280
p.287
p.292
p.299
p.305
Numerical Analysis of Temperature Rise during Dynamic Loading for Dissimilar Steel Joint Specimen
Abstract:
In this study, dynamic temperature field in a dissimilar steel joint specimen was numerically analyzed by means of three-dimensional explicit finite element analysis. Fully coupled thermal stress analysis was performed by using FE-code Abaqus/Explicit ver. 6.12. It was assumed that 90% of the plastic work was transferred to heat. Furthermore, dynamic loading tests were conducted with three-point bending specimen extracted from the dissimilar steel joint between a mild steel and a high tensile strength class steel. The specimen included a U-shape notch in the bonded interface. A high-speed infrared camera was used to measure the temperature field near the bonded interface. The temperature field was recorded at a frame rate of 200 Hz during the dynamic loading test. The numerically calculated temperature field near bonded interface showed reasonable agreement with the temperature field measured by the high-speed infrared thermography. The temperature in the soft steel particularly increased during the dynamic loading. On the other hand, the increase in temperature in the hard steel area was relatively few.
Info:
Periodical:
Pages:
280-286
Citation:
Online since:
December 2018
Authors:
Permissions: