Experimental Research of Effects of Electric Parameters on the Machining Speed and Surface Quality in EDM

Xiao Liang Zhang; Zhao Xi Wang

doi:10.4028/www.scientific.net/MSF.893.257

Paper Titles

Analysis on the Action of Oxidant in Chemical Mechanical Polishing of 304 Ultra-Thin Stainless Steel
p.234

Distribution of Aspect Ratio of Fatigue Crack at Notch Root Depending on Crack Initiation Point of Annealed Steel, JIS S45C
p.240

Microstructural Evolution and Mechanical Properties of Low C-Mn Steels Subjected to Accelerated Cooling
p.245

Fractal Geometry in Metallurgy of Welding and Coatings
p.252

Experimental Research of Effects of Electric Parameters on the Machining Speed and Surface Quality in EDM
p.257

Casting of Clad Strip of Al-SiC_p, Magnesium Alloy Hard-Brittle Light Material by a Twin Roll Caster
p.262

Numerical Simulation and Experimental Research on Forging of Cylinder Bottom
p.267

Mathematical Simulation of Flux Film State in Gap between Mould and Solidified Shell
p.272

Numerical Simulations of Low Pressure Die-Casting for A356 Aluminum Rims
p.276

HomeMaterials Science ForumMaterials Science Forum Vol. 893Experimental Research of Effects of Electric...

Experimental Research of Effects of Electric Parameters on the Machining Speed and Surface Quality in EDM

Abstract:

The effects of serials of electric parameters (i.e. electric pulsed current, electric pulse width, etc.) on machining speed and surface quality were investigated. Furthermore the selected parameters in electrical discharge machining (EDM) were optimized. Experiments indicate that the machining speed of EDM increases with the increasing of pulse current and pulse width. On the other side, the surface quality decrease with the increasing of pulse current and pulse width.

You might also be interested in these eBooks

Mechanical Engineering, Materials Science and Civil Engineering IV

View Preview

Info:

Periodical:

Materials Science Forum (Volume 893)

Pages:

257-261

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.893.257

Citation:

Cite this paper

Online since:

March 2017

Authors:

Xiao Liang Zhang*, Zhao Xi Wang

Keywords:

Electrical Discharge Machining, Machining Parameter, Machining Speed, Pulse Current, Pulse Width, Surface Quality

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] GUO Zhunqin, WANG Chengwen. The Influence Factors of Machining Speed in EDM. Machine Tool & Hydraulics, 2012, 40(8): 191-194.

Google Scholar

[2] GAO Mei. EDM and the Influence of Electrical Parameters on the Machining Efficiency and Precision. Machine Building & Automation, 2006, 35(4): 153 - 155.

Google Scholar

[3] Pei Shunjie, Zhang Yunpeng, Hou Zhongbin. Research on Parameter Optimization of EDM Process for W6Mo5Cr4V2. Electromachining & Mould, 2012, 3: 17-21.

Google Scholar

[4] Nan Huan. The Impact of EDM Denatured Layer on Molding Surface of Die & Mold. Die & Mould Manufacture, 2006, 7: 70-73.

Google Scholar

[5] WANG Guoping. The Research on Improving the EDM Efficiency and Surface Quality. Modern Machinery, 2012, 3: 18-19.

Google Scholar