[1]
P.J. Arrazola, T. Ozel, D. Umbrello, Recent advances in modelling of metal machining processes, J. CIRP Annals Manufacturing Technology. 62(2013)695-718.
DOI: 10.1016/j.cirp.2013.05.006
Google Scholar
[2]
I.S. Jawahir, E. Brinksmeier, and R. M'Saoubi, Surface integrity in material removal processes: Recent advances, J. CIRP Annals-Manufacturing Technolog. 60(2011)603-626.
DOI: 10.1016/j.cirp.2011.05.002
Google Scholar
[3]
Moufki A, Devillez A, Dudzinski D, Molinari A, Thermomechanical Modelling of Oblique Cutting and Experimental Validation, J. International Journal of Machine Tools & Manufacture. 44(2004)971-989.
DOI: 10.1016/j.ijmachtools.2004.01.018
Google Scholar
[4]
Fontaine M, Devillez A, Moufki A, Dudzinski D, Predictive Force Model for Ball-End Milling and Experimental Validation with a Wavelike Form Machining Test, J. International Journal of Machine Tools & Manufacture. 46 (2006)367-380.
DOI: 10.1016/j.ijmachtools.2005.05.011
Google Scholar
[5]
Fontaine M, Moufki A, Devillez A, Dudzinski D, Modelling of Cutting Forces in Ball-End Milling with Tool-Surface Inclination, Part I: Predictive Force Model and Experimental Validation, J. Journal of Materials Processing Technology. 189(2007).
DOI: 10.1016/j.jmatprotec.2007.01.007
Google Scholar
[6]
Fontaine M, Devillez A, Moufki A, Dudzinski D, Modelling of Cutting Forces in Ball-End Milling with Tool-Surface Inclination, Part II: Influence of Cutting Conditions, Run-Out, Ploughing and Inclination Angle, J. Journal of Materials Processing Technology, 189(2007).
DOI: 10.1016/j.jmatprotec.2007.01.007
Google Scholar
[7]
Asad M, Mabrouki T, Memon A A, et al, Three-dimensional finite element modeling of rough to finish down-cut milling of an aluminum alloy, J. Journal of Engineering Manufacture. 227(2013)75-83.
DOI: 10.1177/0954405412462811
Google Scholar
[8]
Shen Zhong, Sun Xuan, Liu Gang, Chen Ming, The Milling Mechanism of Ti6Al4V Based on Average Cutting Thickness, J. Journal of Shanghai Jiaotong University. 41(2007)614-618.
Google Scholar
[9]
Fang Rui, Jin Chengzhe, Research on Cutting Forces modeling and Test of Micro turn-milling, Shenyang Ligong University(2013).
Google Scholar
[10]
Li Leng, Kong Xiangwei, Research of high-temperature alloy machining simulation technologies, Northeastern University (2009).
Google Scholar
[11]
Wu Hongbing, Jia Zhixin, Liu Gang, et al, Finite element modeling of Ti6Al4V alloy high speed cutting, J. Journal of Zhejiang University(Engineering Science). 44(2010)982-987.
Google Scholar
[12]
Yang Kai, Liang Yingchun, Research on The key Technologies of Micro-milling and Micro-cutter, Harbin Institute of Technology (2012).
Google Scholar
[13]
Usui E, Shirakashi T, Kitagawa T, Analytical Prediction of Three Dimensional Cutting Process, Part 3. Cutting Temperature and Crater Wear of Carbide Tool, J. ASME Journal of Engineering for Industry. 100(1978)236-243.
DOI: 10.1115/1.3439415
Google Scholar
[14]
M'Saoubi R, Chandrasekaran H, Experimental Study and Modelling of Tool Temperature Distribution in Orthogonal Cutting of AISI 316L and AISI3115 Steels, J. International Journal of Advanced Manufacturing Technology. 56(2011)865-877.
DOI: 10.1007/s00170-011-3257-y
Google Scholar
[15]
S Leung Soo, Richard C Dewes, David K Aspinwall, 3D FE modelling of high-speed ball nose end milling, J. International Journal of Advanced Manufacturing Technology. 50(2010)871-882.
DOI: 10.1007/s00170-010-2581-y
Google Scholar