Paper Titles

Towards Chemical Mapping at Sub-Micron Resolution: Near-Field Spectroscopic Delineation of Interphase Boundaries
p.1

Indentation Size Effect and the Hall-Petch ‘Law’
p.13

From Wipers to the JKR Equation: Boundary Lubrication and Adhesion of Rubber
p.27

Effect of Surface Roughness on the Adhesion of Elastomers to Hard Surfaces
p.39

Contact Problems at Nano/Microscale and Depth Sensing Indentation Techniques
p.53

Indentation of Ceramics, Some Highlights
p.77

The Effect of Solid Solution Impurities on Dislocation Nucleation in a (001) Mo – 1.5 at.% Ir Single Crystal
p.85

Self-Sustained Fracture Waves in Soda-Lime Glass
p.95

HomeMaterials Science ForumMaterials Science Forum Vol. 662Contact Problems at Nano/Microscale and Depth...

Contact Problems at Nano/Microscale and Depth Sensing Indentation Techniques

Article Preview

Abstract:

An overview of development of indentation techniques and connections between contact mechanics and methods of extracting mechanical characteristics from indentation data is given. Observed disagreements between the experimental observations and the models of indentation are discussed. It is shown that this disagreement is often caused by violation of hypotheses that are used in the formulation of the appropriate boundary-value contact problems and strictly speaking one cannot apply directly the solutions of Hertz type contact problems to indentation tests employing the sharp indenters. It is shown that commonly used experimental test involving sharp pyramidal and conical indenters may be applied to study plastic properties of materials while this approach is not very accurate for estimations of elastic modulus of the test solid. The recently proposed by Borodich and Galanov non-direct method that employs data of elastically loading of a spherical indenter is described. It is argued that the non-direct method can be used for determination of both the work of adhesion and elastic modulus of the tested material.

You might also be interested in these eBooks

Mechanical Behaviour of Materials

Info:

Periodical:

Materials Science Forum (Volume 662)

Pages:

53-76

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.662.53

Citation:

Cite this paper

Online since:

November 2010

Authors:

Feodor M. Borodich

Keywords:

Adhesive Contact, BG Non-Direct Method, Contact Mechanics, Elastic Characteristics of Material, Hardness, Ill-Posed Problem, Nanoindentation, Plastic Characteristics of Material, Self-Similarity

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

[1] Y.Y. LimM.M. Chaudhri and Y.Y. LimM: Key Engineering Materials Vol. 345-346 (2007), p.1107.

[2] S.R. Williams: Hardness and Hardness Measurements (American Society for Metals, Cleveland 1942).

[3] D. Tabor: The Hardness of Metals. (Clarendon Press, Oxford 1951).

[4] F.M. Borodich and L.M. Keer: Int. J. Solids Struct. Vol. 41 (2004), p.2479.

[5] J.A. Brinell, in: Communications présentées devant le Congrés international des méthodes d'essai des matériaux de construction, tenu à Paris du 9 au 16 juillet 1900, volume 2, (1900).

[6] A.K. Bhattacharya and W.D. Nix: Int. J. Solids Struct. Vol. 24 (1988), p.881.

[7] P. Ludwik: Die Kegeldruckprobe, ein neues Verfahren zur Härtebestimmung von Materialien (Springer, Berlin 1908).

[8] H. O'Neill: Hardness Measurement of Metals and Alloys (Chapman and Hall, London 1934).

[9] F.P. Bowden and D. Tabor: The Friction and Lubrication of Solids (Oxford University Press, Oxford 1950).

[10] I.M. Hutchings: J. Mater. Res. Vol. 24 (2009), p.581.

[11] M.M. Khrushchov and E.S. Berkovich: Microhardness that is determined by indentation technique (USSR Academy of Sciences Publisher, Moscow-Leningrad 1943) (Russian).

[12] M.M. Khrushchov and E.S. Berkovich: Devices PMT-2 and PMT-3 for microhardness testing (USSR Academy of Sciences Publisher, Moscow-Leningrad 1950) (Russian).

[13] A.A. Lebedeff: Nature Vol. 128, (1931) p.491.

[14] M.M. Khrushchov and E.S. Berkovich: Izvestiya AN SSSR. Otd. Tekh. Nauk #11 (1950), p.1645 (Russian).

[15] N. Gane and F.P. Bowden: J. Appl. Physics Vol. 39 (1968), p.1432.

[16] M.M. Khrushchov and E.S. Berkovich: Industrial Diamond Review Vol. 11 (1951), p.42.

[17] B.A. Mott: Micro-Indentation Hardness Testing (Butterworths Sc. Pub., London 1956).

[18] G.N. Kalei: Mashinovedenie, Vol. 4 (1968), p.105 (Russian).

[19] V.P. Alekhin, G.S. Berlin, A.V. Isaev, G.N. Kalei, V.A. Merkulov, V.N. Skvortsov, A.P. Ternovskii, M.M. Khrushchov, G.D. Shnyrev and M. Kh. Shorshorov: Industrial Lab. Vol. 38 (1972), p.619.

[20] D. Newey, M.A. Wilkins and H.M. Pollock: J. Phys. E: Sci. Instruments, Vol. 15 (1982), p.119.

[21] J.B. Pethica, R. Hutchings and W.C. Oliver: Philos. Mag. A Vol. 48 (1983), p.593.

[22] L.A. Galin: Contact Problems in the Theory of Elasticity (Gostekhizdat, Moscow-Leningrad 1953) (Eng. transl. editer I.N. Sneddon, North Carolina State College, Departments of Mathematics and Engineering Research, NSF Grant No. G16447, 1961).

[23] K.L. Johnson: Contact Mechanics. (Cambridge University Press, Cambridge 1985).

[24] L.A. Galin: Contact problems: the legacy of L.A. Galin. (Ed. G.M.L. Gladwell, Dordrecht, Springer 2008).

[25] H. Hertz: J. reine angewandte Mathematik., Vol. 92 (1882), p.156.

[26] K.L. Johnson: Proc. Inst. Mech. Eng. Vol. 196 (1982), p.363.

[27] J. Boussinesq: Applications des potentiels à l'étude de l'équilibre et du mouvement des solides élastique (Paris: Gauthier-Villars 1885).

[28] A.E.H. Love: Quart. J. Maths Vol. 10, (1939) p.161.

[29] I.Y. Shtaerman: Doklady AN USSR Vol. 10 (1939), p.161 (Russian).

[30] L.A. Galin: PMM J. Appl. Math. Mech. Vol. 10 (1946), p.425 (Russian).

[31] I.N. Sneddon: Int. J. Eng. Sci. Vol. 3 (1965), p.47.

[32] S.G. Lekhnitskii: Theory of Elasticity of an Anisotropic Elastic Body. (Gostekhizdat, Moscow 1950). (Russian); English translation: (Holden-Day, San Francisco 1963).

[33] J.R. Willis: JMPS Vol. 14, (1966), p.163.

[34] H.D. Conway, K.A. Farnham, T.C. Ku: J. Appl Mech. (ASME) Vol. 34 (1967), p.491.

[35] V.I. Mossakovskii: PMM J. Appl. Math. Mech. Vol. 27 (1963), p.630.

[36] D.A. Spence: Proc. R. Soc. London A, Vol. 305 (1968), p.55.

[37] F.M. Borodich and L.M. Keer: Proc. R. Soc. Lond. A Vol. 460, (2003), p.507.

[38] H. Hertz, in: Miscellaneous Papers by H. Hertz, edited by D.E. Jones and G.A. Schott, Macmillan, London, (1896).

[39] N.N. Davidenkov: Zhur. Tekh. Fiz. Vol. 13 (1943), p.389 (Russian).

[40] G.P. Zaitsev: Zhur. Tekh. Fiz. Vol 19 (1949), p.336 (Russian).

[41] M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh and S. Suresh: Acta mater. Vol. 49 (2001), p.3899.

[42] E. Meyer: Physikalische Z., Vol. 9 (1908), p.66.

[43] B.A. Galanov: Mechanics of Solids Vol. 16 (1981), p.61.

[44] F.M. Borodich: PMM J. Appl. Math. Mech. Vol. 47 (1983), p.519.

[45] B.A. Galanov: Dokl. AN Urain. SSR A No. 6, (1981), p.36 (Russian).

[46] B.A. Galanov: Soviet Appl. Mechanics Vol. 18 (1982), p.49.

[47] B.A. Galanov and S.A. Kravchenko, in: Soprotivlenie material. I teoriya sooruzhen. #49 (1986), p.68.

[48] F.M. Borodich, in: Abstracts of Reports of All-Union Conference ``Metal'-programme, s fulfillers, edited by A.A. Bogatov et al. Krasnoyarskii Polytechnical Institute Press, Abakan (1988), p.195 (Russian).

[49] F.M. Borodich, in: Report TR/MAT/FMB/98-98, Glasgow Caledonian University, Glasgow (1998).

[50] F.M. Borodich: Strength of Materials Vol. 21 (1989), p.1668.

[51] F.M. Borodich, in: Investigation in Region of Theory, Technology and Instrumentation of the Punching Industry, Tula (1990), p.16 (Russian).

[52] F.M. Borodich, in: Proceedings of All-Union Institute on Light Alloys, Moscow (1990), p.1 (Russian).

[53] F.M. Borodich: Int. J. Solids Structures Vol. 30 (1993), p.1513.

[54] F.M. Borodich: C. R. Ac. Sc. (Paris), Ser. 2 Vol. 316 (1993), p.281.

[55] F.M. Borodich: Acta Mechanica Vol. 131 (1998), p.47.

[56] F.M. Borodich: Three-dimensional problems of contact of blunt bodies with continuous media. (DSc Thesis, Moscow State University, Moscow, 1990). (Russian).

[57] B. Storåkers, in: Report, Royal Inst. Technology, Stockholm, (1989).

[58] R. Hill, B. Storåkers and A.B. Zdunek: Proc. R. Soc. London A Vol. 423 (1989), p.301.

[59] B.A. Galanov, in: IUTAM Symposium on Scaling in Solid Mechanics, edited by F.M. Borodich, Springer (2009).

[60] F.M. Borodich and B.A. Galanov: J. Mech. Phys. Solids Vol. 50 (2002), p.2441.

[61] S. Biwa and B. Storåkers: J. Mech. Phys. Solids Vol. 43 (1995), p.1303.

[62] J.Y. Shu and N.A. Fleck: Int. J. Solids Structures Vol. 35 (1998), p.1363.

[63] B.E. Pobedrya PMM J. Appl. Math. and Mech. Vol. 48 (1984), p.10.

[64] Y.N. Rabotnov: Creep Problems in Structural Members. (North-Holland, New York 1969).

[65] J. Betten: J. Rheology Vol. 25 (1981), p.565.

[66] R. Hill: Proc. R. Soc. London A Vol. 436 (1992), p.617.

[67] F.M. Borodich and A.B. Mosolov: Zhurnal Technicheskoi Fiziki Vol. 61 (1991), p.50.

[68] R. Hill: The Mathematical Theory of Plasticity. (Clarendon Press, Oxford 1950).

[69] R. Hill: A private communication to F.M. Borodich (1992).

[70] A.F. Bower, N.A. Fleck, A. Needleman and N. Ogbonna: Proc. R. Soc. London A Vol. 441 (1993), p.97.

[71] B. Storåkers and P.L. Larsson: J. Mech. Phys. Solids Vol. 42 (1994), p.307.

[72] J. Larsson and B. Storåkers: J. Mech. Phys. Solids Vol. 50 (2002), p. (2029).

[73] F.M. Borodich, L.M. Keer and C.S. Korach: Nanotechnology Vol. 14 (2003), p.803.

[74] B.S. Ioffe: Zhur. Tekh. Fiz. Vol 19 (1949), p.1089 (Russian).

[75] N.N. Davidenkov: Zhur. Tekh. Fiz. Vol. 14 (1944), p.507 (Russian).

[76] A.A. Bochvar and O.S. Zhadaeva: Izvestiya AN SSSR. Otd. Tekh. Nauk #4 (1947), p.111 (Russian).

[77] I.A. Polonsky and L.M. Keer: J. Tribology Vol. 118 (1996), p.335.

[78] W.D. Nix and H. Gao: J. Mech. Phys. Solids Vol. 46 (1998), p.411.

[79] L.M. Brown: Materials Science Forum Vol. 550 (2007), p.105.

[80] T.F. Page: J. Mater. Res. Vol. 7 (1992), p.450.

[81] E. Le Bourhis, G. Patriarche, L. Largeau and J.P. Rivière: J. Mater. Res. Vol. 19 (2004), p.131.

[82] P. Lemoine, J.F. Zhao, J.P. Quinn, J.A. McLaughlin and P. Maguire: Thin Solid Films Vol. 379 (2000), p.166.

[83] S.I. Bulychev, V.P. Alekhin, M. Kh. Shorshorov, A.P. Ternovskii and G.D. Shnyrev: Industrial Lab. Vol. 41 (1975), p.1409.

[84] G.M. Pharr, W.C. Oliver and F.R. Brotzen: J. Mater. Res. Vol. 7 (1992), p.613.

[85] J.L. Loubet, J.M. Georges, O. Marchesini and G. Meille: J. Tribology Vol. 106 (1984), p.43.

[86] M.F. Doerner and W.D. Nix: J. Mater. Res. Vol. 1 (1986), p.601.

[87] W.C. Oliver and G.M. Pharr: J. Mater. Res. Vol. 7 (1992), p.1564.

[88] A. Delafargue and F.J. Ulm: Int. J. Solids Struct. Vol. 41 (2004), p.7351.

[89] R. Shahsavari and F.J. Ulm: J. Mechanics Materials Structures Vol. 4 (2009), p.523.

[90] F.M. Borodich: Sov. Appl. Mech. Vol. 30 (1990), p.1513.

[91] B.A. Galanov: Mechanics of Solids Vol. 18 (1983), p.51.

[92] N. Schwarzer: Philosophical Magazine Vol. 86 (2006), p.5231.

[93] V.M. Kindrachuk, B.A. Galanov; V.V. Kartuzov and S.N. Dub: J. Mater. Res. Vol. 44 (2009), p.2599.

[94] B.A. Galanov, O.N. Grigor'ev, Yu.V. Mil'man and I.P. Ragozin: Strength of Materials Vol. 15 (1983), p.1624.

[95] B.A. Galanov, O.N. Grigor'ev, Yu.V. Mil'man, I.P. Ragozin and V.I. Trefilov: Sov. Phys. Dokl. Vol. 29 (1984), p.146.

[96] G.M. Pharr and A. Bolshakov: J. Mater. Res. Vol. 17 (2002), p.2660.

[97] M. Sakai, T. Akatsu and S. Numata: Acta Materialia Vol. 52 (2004), p.2359.

[98] N. Schwarzer and M. Fuchs: Thin Solid Films Vol. 515 (2006), p.1080.

[99] Y.Y. Lim and M.M. Chaudhri: J. Appl. Phys. Vol. 98 (2005), 073518.

[100] M.M. Chaudhri: A private communication to F.M. Borodich (2007).

[101] H.M. Pollock, D. Maugis and M. Barquins, in: Microindentation Techniques ln Material Science and Engineering, edited by P.J. Blau and B.R. Lawn, Am. Soc. Testing Materials (1986).

[102] J.A. Greenwood and J.B.P. Williamson: Proc. R. Soc. London A Vol. 295 (1966), p.300.

[103] V.P. Alekhin and S.I. Bulychev: Physics Chemistry Materials Treatment #3 (1978), p.134 (Russian).

[104] B.R. Lawn and V.R. Howes: J. Mater. Sci. Vol. 16 (1981), p.2745.

[105] Y.V. Milman, B.A. Galanov and S.I. Chugunova: Acta Metallurgica et Materialia Vol. 41 (1993), p.2523.

DOI: 10.1016/0956-7151(93)90122-9

[106] B.V. Derjaguin: Kolloid Z. Vol. 69 (1934), p.155.

[107] K. Kendall: Molecular adhesion and its applications (Kluwer Academic, New York 2001).

[108] K.L. Johnson: Brit. J. Appl. Phys. Vol. 9 (1958), p.199.

[109] K.L. Johnson, K. Kendall and A. D. Roberts: Proc. R. Soc. A Vol. 324 (1971), p.301.

[110] B.V. Derjaguin, V.M. Muller and Y.P. Toporov: J. Colloid. Interface Sci. Vol. 53 (1975), p.314.

[111] D. Maugis: Contact, Adhesion and Rupture of Elastic Solids (Springer Verlag, Berlin 2000).

[112] K. Kendall: J. Phys. D: Appl. Phys. Vol. 4 (1971), p.1186.

[113] F.M. Borodich and B.A. Galanov: submitted to Proc. R. Soc. A (2010).

[114] F.M. Borodich and B.A. Galanov Proc. R. Soc. A Vol. 464 (2008), p.2759.

[115] B. Storåkers and D. Elaguine: J. Mech. Phys. Solids Vol. 53 (2005), p.1422.

[116] O.I. Zhupanska: Proc. R. Soc. A Vol. 465 (2009), p.2565.

[117] V.M. Kindrachuk, B.A. Galanov; V.V. Kartuzov and S.N. Dub: Nanotechnology Vol. 17 (2006), p.1104.

[118] F.M. Borodich and D.A. Onishchenko: Int. J. Solids Struct. Vol. 36 (1997), p.2585.

[119] V.A. Zhuravlev : Proc. Inst. Mech Eng. Part J. J. Eng. Trib. Vol. 221 (2007), p.895.

[120] F.M. Borodich Proc. Inst. Mech Eng. Part J. J. Eng. Trib. Vol. 221 (2007), p.893.

[121] Y.Y. Lim and M.M. Chaudhri: Philosophical Magazine Vol. 83 (2003), p.3427.

[122] S.J. Bull: J. Phys. D: Appl. Phys. Vol. 38 (2005), p. R393.

[123] A.C. Fischer-Cripps: Surface and Coatings Technology Vol. 200 (2006), p.4153.