[1]
M. Wenderoth, R. Völkl, S. Vorberg, Y. Yamabe-Mitarai, H. Harada and U. Glatzel: Intermetallics Vol. 15 (2007), p.539.
DOI: 10.1016/j.intermet.2006.09.009
Google Scholar
[2]
Y. Yamabe-Mitarai, Y. Gu, C. Huang, R. Völkl, H. Harada: JOM Vol. 56 (2004), p.34.
Google Scholar
[3]
J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma and K. Ishida: Science Vol. 312 (2006), p.90.
DOI: 10.1126/science.1121738
Google Scholar
[4]
J. Rösler, D. Mukherji and T. Baranski: Adv. Eng. Mater. Vol. 9 (2007), p.876.
Google Scholar
[5]
B.P. Bewlay, M.R. Jackson and H.A. Lipsitt: Metall. Mater. Trans. A Vol. 27 (1996), p.3801.
Google Scholar
[6]
B.P. Bewlay, M.R. Jackson, J. -C. Zhao, P.R. Subramanian, M.G. Mendiratta, J.J. Lewandowski: MRS Bulletin Vol. 28 (2003), p.646.
DOI: 10.1557/mrs2003.192
Google Scholar
[7]
P. Jéhanno, M. Heilmaier, H. Kestler, M. Böning, A. Venskutonis, B. Bewlay and M. Jackson: Metall. Mater. Trans. A Vol. 36 (2005), p.515.
DOI: 10.1007/s11661-005-0165-5
Google Scholar
[8]
D.M. Dimiduk and J.H. Perepezko: MRS Bulletin Vol. 28 (2003), p.639.
Google Scholar
[9]
J.J. Kruzic, J.H. Schneibel and R.O. Ritchie: Metall. Mater. Trans. A Vol. 36 (2005), p.2393.
Google Scholar
[10]
K. Yoshimi, S. Nakatani, N. Nomura and S. Hanada: Intermetallics Vol. 11 (2003), p.787.
Google Scholar
[11]
D.M. Berczik: U.S. Patent 5, 595, 616. (1997).
Google Scholar
[12]
M. Krüger, S. Franz, H. Saage, M. Heilmaier, J.H. Schneibel, P. Jéhanno, M. Böning, and H. Kestler: Intermetallics Vol. 16 (2008), p.933.
DOI: 10.1016/j.intermet.2008.04.015
Google Scholar
[13]
P. Jéhanno, M. Heilmaier, H. Saage, H. Heyse, M. Böning, H. Kestler, and J. Schneibel: Scripta Mater. Vol. 55 (2006), p.525.
DOI: 10.1016/j.scriptamat.2006.05.033
Google Scholar
[14]
M. U. Cohen: Rev. Sci. Instr. 6 (1935), p.68.
Google Scholar
[15]
D. Balzar and H. Ledbetter: J. Appl. Cryst. 26 (1993), p.97.
Google Scholar
[16]
R. Völkl, B. Fischer, M. Beschliesser and U. Glatzel: Mat. Sci. Eng. A Vol. 483-484 (2008), p.587.
Google Scholar
[17]
J.H. Perepezko, R. Sakidja, S. Kim, Mat. Res. Soc. Symp. Proc. Vol. 646 (Materials Research Society, Warrendale, PA 2001), p. N4. 5. 1.
Google Scholar
[18]
D. Sturm, M. Heilmaier, J.H. Schneibel, P. Jéhanno, B. Skrotzki and H. Saage: Mater. Sci. Eng. A Vol. 463 (2007), p.107.
DOI: 10.1016/j.msea.2006.07.153
Google Scholar
[19]
A.P. Alur, N. Chollacoop and K.S. Kumar: Acta Mater. Vol. 52 (2004), p.5571.
Google Scholar
[20]
H. Saage, M. Krüger, D. Sturm, M. Heilmaier, J.H. Schneibel, E. George, L. Heatherly, Ch. Somsen, G. Eggeler and Y. Yang: accepted for publication in Acta Materialia (2009).
DOI: 10.1016/j.actamat.2009.04.040
Google Scholar
[21]
P. Jéhanno, M. Heilmaier and H. Kestler: Intermetallics Vol. 12 (2004), p.1005.
Google Scholar
[22]
O.D. Sherby and J. Wadsworth: Prog. Mater. Sci. Vol. 33 (1989), p.169.
Google Scholar
[23]
P. Jéhanno, M. Heilmaier, H. Saage, M. Böning, H. Kestler, J. Freudenberger, and S. Drawin: Mater. Sci. Eng. A Vol. 463 (2007), p.216.
DOI: 10.1016/j.msea.2006.08.125
Google Scholar
[24]
M. Heilmaier, M. Krüger, J. Rösler, D. Mukherji, U. Glatzel, R. Völkl, R. Hüttner, G. Eggeler, Ch. Somsen, T. Depka, H. -J. Christ, B. Gorr and S. Burk: submitted to JOM (2009).
DOI: 10.1007/s11837-009-0106-7
Google Scholar
[25]
A. Pineau: Acta Metall. Vol. 24 (1976), p.559.
Google Scholar
[26]
P. Caron and T. Khan: Mater. Sci. Eng. Vol. 61 (1983), p.173).
Google Scholar
[27]
H. Mughrabi, M. Ott and U. Tetzlaff: Mater. Sci. Eng. A Vol. 234-236 (1997), p.434.
Google Scholar
