Measurement of the Welding Full-Field Deformation of the Sheet Material with Different Curvature Based on Digital Image Correlation

Fan Chang Meng; Jin Liang; Jie Li; Xiao Guang Wang

doi:10.4028/www.scientific.net/KEM.730.554

Paper Titles

Modeling and Verification of Relaxation Behavior for Magnetorheological Elastomers with Applied Magnetic Field
p.527

Comparison of the Interface-Capturing Behavior between LSM and MCLS
p.533

Mechanical Properties Prediction of Interlayer Enhanced Laminated Carbon Fiber Composite Materials Containing Inclusions
p.541

Calculating Mechanics Characteristics of Single-Walled Carbon Nanotube Materials by Finite Element Method
p.548

Measurement of the Welding Full-Field Deformation of the Sheet Material with Different Curvature Based on Digital Image Correlation
p.554

Influence of Phase Change Material Application on Photovoltaic Panel Performance
p.563

Viscoelastic Vibration Damping Materials for Application in a Temperature Range above 150°C
p.569

Development of Sunlight LED Bollard Based on C/GFRP Floodlight Composite
p.574

Analysis of the Application of Piezoelectric Ceramic Material in the De-Icing Technique of the Aircrafts
p.580

HomeKey Engineering MaterialsKey Engineering Materials Vol. 730Measurement of the Welding Full-Field Deformation...

Measurement of the Welding Full-Field Deformation of the Sheet Material with Different Curvature Based on Digital Image Correlation

Abstract:

It is of difficulties in measuring welding deformation because of high temperature and the light intensity. In this paper the traditional welding deformation measurement method are reviewed,and the features and limitations of each method were analyzed,and then focused on the non-contact optical measurement method based on the WDIC. In this paper, a noncontact measurement method based on WDIC (weak digital image correlation) is proposed to obtain full-field buckling deformation in the whole welding and cooling process. And the matching difficulties which are caused by weak speckle performance and the large deformation around the solder joint are overcome through the method of piecewise benchmarks based on the continuity of adjacent states. Based on the above methods, the experiment of the sheets welding with three different curvatures was carried on and the following conclusions are summarized based on the analysis of the buckling deformation. The formation mechanisms of out-of-plane deformation in welding area were clarified based on the experimental results. First, low carbon steel occurs buckling deformation with dish shape in welding process and saddle shape in cooling process. Second, the curvature of the sheet has a great influence on the result of the welding. The sheet with a bigger curvature has the smaller displacement in Z direction in the welding process and the smaller transverse strain in the area adjacent to the welding seam. Those measuring results can be used to analyze the influence factors of welding deformation, control the welding deformation and verify the welding numerical simulation.

You might also be interested in these eBooks

Innovative Materials: Engineering and Applications II

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 730)

Pages:

554-559

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.730.554

Citation:

Cite this paper

Online since:

February 2017

Authors:

Fan Chang Meng, Jin Liang*, Jie Li, Xiao Guang Wang

Keywords:

Buckling Deformation, Curvature, Out-of-Plate Distortion, Sheet Material, Weak Digital Image Correlation Method

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] H. Murakawa, D. Deng, N. Ma, Applications of Inherent Strain and Interface Element to Simulation of Welding Deformation in Thin-plate Structures, Comp. Mater. Sci., 51 (2011) 43–52.

DOI: 10.1016/j.commatsci.2011.06.040

Google Scholar

[2] Y. H. Ye, J. He, J. P. Cai, J. M. Sun, D. A. Deng, Welding deformations of 6061-T651 Al alloy thin-plate joints. Chinese J. Nonferr. Metal. 24(10) (2014) 2435-2442.

Google Scholar

[3] H. Lu, J. M. Chen, J. Y. Liu, J. B. Chen, H. J. Zheng, Bucking distortion prediction model and application in welded thin plate. Proc. 2007 Int. Forum Weld. Tech. Shipping Ind. 2007, pp.16-18.

Google Scholar

[4] J. C. Wang, X. Q. Yin, N. Ma, et al. Study tendon force for buckling welding distortion. Preprint. Nat. Meet. Japan Weld. Soc. 90 (2012) 140-141.

Google Scholar

[5] J. C. Wang, X. Q. Yin, Experimental and computational analysis of residual buckling distortion of bead-on-plate welded joint. J. Mater. Process. Tech. 213 (2013) 1447-1458.

DOI: 10.1016/j.jmatprotec.2013.02.009

Google Scholar

[6] Y. H. Huang, L. Liu, F.C. Sham, Optical strain gauge vs. traditional strain gauges for concrete elasticity modulus determination Original Research. Int. J. Light Electron. Opt. 121(18) (2010) 1635-1641.

DOI: 10.1016/j.ijleo.2009.03.002

Google Scholar

[7] X. Y. Ruan, Y. F. Bao, Z. X. Shi, Measuring methods of welding deformation. Electric Weld. Machine. 35(5) (2005) 55-57.

Google Scholar

[8] M. Zain-Ul-Abdein, D. Nelias, J. F. Jullien, et al. Prediction of laser beam welding-induced distortions and residual stresses by numerical simulation for aeronautic application. J. Mater. Process. Tech. 209(6) (2009) 2907-2917.

DOI: 10.1016/j.jmatprotec.2008.06.051

Google Scholar

[9] V. Ocelik, J. Bosgra, J. Hosson, In-situ Strain Observation in High Power Laser Cladding, Surf. Coat. Tech. 203 (2009) 3189–3196.

DOI: 10.1016/j.surfcoat.2009.03.050

Google Scholar

[10] M. D. Strycker, P. Lava, W. V. Paepegem, et al. Measuring welding deformations with the digital image correlation technique. Weld. J. 90 (2009) 107-112.

Google Scholar

[11] Z. Z. Tang, J. Liang, Z. Z. Xiao, C. Guo, H. Hu, Three-dimensional digital image correlation system for deformation measurement in experimental mechanics, Opt. Eng. 49 (2010) 103601.

DOI: 10.1117/1.3491204

Google Scholar

[12] H. Hu, J. Liang, Z. Z. Xiao, et al. Image correlation method for full-field deformation measurements during metal sheet welding processes. OPTIK, 124(21) (2013) 5193-5198.

DOI: 10.1016/j.ijleo.2013.03.051

Google Scholar

[13] Z. Z. Tang. Study on Theory and Application of Digital Image Correlation. Xi'an Jiaotong University, 2012, p.12.

Google Scholar

[14] B. Q, Shi. Three-dimensional Full-field Deformation Measurement for sheet Metal Forming. Xi'an Jiaotong University, 2012, p.7.

Google Scholar