Mixing Y89 Influence on Mechanical Properties of Casting Mg17Al12

Hansong Yang; Shao Ju Hao; Jun Jie Liang

doi:10.4028/www.scientific.net/KEM.667.303

Paper Titles

Electrochemical Characteristics of the Amorphous-Nanocrystal Ni–Mo Cathodes in Sodium Hydroxide Solution
p.280

Experimental and Modelling of Constitutive Equation of Polycarbonate Material
p.286

Finite Element Modeling and Simulation towards Metallic Microstructure of Titanium Alloy Based on Abaqus
p.292

Infulence of Chemical Composition and Metallographic Structure to Dimagnetic Stainless Steel
p.298

Mixing Y89 Influence on Mechanical Properties of Casting Mg17Al12
p.303

Pyrolysis Kinetics of PA66/CB
p.308

Study on Characteristics of Green Parts of Birch Flour/Polyester Composite by Selective Laser Sintering
p.314

Experimental Research on Selective Laser Sintering of Bamboo Flour/Polyamide Hot-Melt Adhensive Blend
p.320

Finite Element Simulation and Experimental Study on Micro-Milling Cobalt-Based Alloy
p.326

HomeKey Engineering MaterialsKey Engineering Materials Vol. 667Mixing Y89 Influence on Mechanical Properties of...

Mixing Y89 Influence on Mechanical Properties of Casting Mg17Al12

Abstract:

For its light quality, good thermal conductivity, and excellent electricity shielding performance, Magnesium alloy has been used in industry, agricultural and so on, for rare earth elements can improve the mechanical performance of magnesium alloy, the study of powder metallurgy is influence by rare earth magnesium is few at present. so, in this paper, by mixing powder metallurgy method the Y89 element was added in Mg17Al12 magnesium alloy, the influence of Y89 on microstructure, hardness and compression performance of Mg17Al12 magnesium alloy was studied, The experimental results show that when amount of Y89’s addition, the mechanical performance is more then and when is 1.22%, its mechanical performance is best, hardness is 66.7 HV, compressive strength is 113.6 MPa,increased respectively by 19.7% and 29.3% compared the Mg17Al12 magnesium alloy substrate, and the grain refinement effect of Mg17Al12 magnesium alloy is the best at this time.