[1]
A. Panda. et. all., Accompanying phenomena in the cutting zone machinability during turning of stainless steels., International Journal Machining and Machinability of Materials, INDERSCENCE Publisher, Switzerland. ISSN 1748-5711(print), ISSN 1748-572X (online). Vol. 5, No. 4, 2009, 383-400 p.
DOI: 10.1504/ijmmm.2009.026899
Google Scholar
[2]
E. Isakov, Cutting Data for turning of steel, Industrial Press, Inc. 989 Avenue of the Americas New York, NY 10018, p.316, 2009, ISBN 978 – 0 – 8311- 3314-6.
Google Scholar
[3]
E.D. Whitney, Ceramic Cutting Tools, William Andrew Publishing/Noyes, p.353, 1994, ISBN 978-0-8155-1355-0.
Google Scholar
[4]
I. Orlovsky. et. al., Mathematical modelling of the spray drying technological process", In: Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium on "Intelligent Manufacturing & Automation : Power of Knowledge and Creativity,: 23-26th November 2011, Vienna, Austria. - Vienna: DAAAM International, 2011 P. 1067-1068. - ISBN 978-3-901509-83-4 - ISSN 1726-9679.
DOI: 10.2507/22nd.daaam.proceedings.520
Google Scholar
[5]
J.R. DAVIS, Materials. ASM Specialty Handbook, ASM International, Materials Park, Ohio, p.501, 1998, ISBN 0-8170-545-1.
Google Scholar
[6]
J. Zajac, et. al., Cutting facilities of new type of came cutting material., In: Proceedings of the conference PPTO, Košice, 1995, pp.138-139.
Google Scholar
[7]
K. Vasilko, Analytical theory of splinter machining, Prešov FVT, p.338, 2007, ISBN 978-80-8073-759-7.
Google Scholar
[8]
M. Neslušan. et. al., Experimental methods in splinter machining, EDIS ŽU Žilina, p.343, 2007, ISBN 978-80-8070-711-8).
Google Scholar
[9]
P. Michalik, J. Zajac: Intelligently programming of holes machining, In: Manufacturing Engineering, No. 4, Vol. IX (2010), pp.63-65, ISSN 1335-7972.
Google Scholar
[10]
R. Cep, et. al: Ceramic cutting tool tests with interrupted cut simulator, In: IN-TECH 2010: Proceedings of International Conference on Inovative Technologies: Praha : 14. - 16. 9. 2010. - Jaroměř : Tisk AS, 2010 pp.144-148.
Google Scholar
[11]
STN ISO 3685: Tool-life testing with single-point turning tools, (1999).
Google Scholar
[12]
S. Hloch, J. Valíček, Prediction of distribution relationship of titanium surface topography created by abrasive waterjet, 2011. In: International Journal of Surface Science and Engineering. Vol. 5, no. 2/3 (2011), p.152–168. - ISSN 1749-785X.
DOI: 10.1504/ijsurfse.2011.041399
Google Scholar
[13]
Š. Gašpar, J. Maščenik, J. Paško, The effect of degassing pressure casting molds on the quality of pressure casting, , 2012. In: Advanced Materials Research. Vol. 428 (2012), pp.43-46. - ISSN 1022-6680.
DOI: 10.4028/www.scientific.net/amr.428.43
Google Scholar
[14]
V. Fecova, et. al. Possibility of a quick check on milling strategy suitability, Tehnicki Vjesnik, No. 4, Vol. XIX, December 2012, pp.959-964, ISSN 1330-3651.
Google Scholar
[15]
Z. Somsakova, et. al. Machining of Wood Plastic Composite, Materiale plastice, No. 1, Vol. 49, January 2012, pp.55-57, ISSN 0025-5289.
Google Scholar