Research on Dynamics Simulation of Milling Process for Frame Guide Plate Surface of Marine Diesel Engine

Xi Feng Fang; Chun Qiao Wu; Sheng Wen Zhang; W. Jia; C.Q. Yang; Y.H. Tong

doi:10.4028/www.scientific.net/KEM.455.417

Paper Titles

Structural Topology Optimization of the Column of Form Grinding Machine
p.397

Simulation and Experiment of New Whole Vibrator for Ultrasonic Vibration Internal Grinding System
p.402

Effects of Oscillation Frequency on the Tribological Properties of Self-Lubrication Spherical Plain Bearings with PTFE Woven Liner
p.406

Parametric Design of Tractor Configuration Using API Based on CATIA
p.411

Research on Dynamics Simulation of Milling Process for Frame Guide Plate Surface of Marine Diesel Engine
p.417

Life Prediction of Bearings Based on Fuzzy Theory
p.422

Oxidation and Wear Resistance of Ni-Y₂O₃-ZrO₂ Nanocomposite Coating Prepared by Ultrasonic Electrodeposition
p.427

Research on Frictional Wear Property of the High Vanadium High Speed Steel in Conditions of Low Slip-Roll Ratio
p.431

Research on Establishing Assessment Datum Plane of Three Dimensional Surface Micro-Topography
p.435

HomeKey Engineering MaterialsKey Engineering Materials Vol. 455Research on Dynamics Simulation of Milling Process...

Research on Dynamics Simulation of Milling Process for Frame Guide Plate Surface of Marine Diesel Engine

Abstract:

In order to choose milling parameters quickly, reasonably and improve milling quality, avoid vibration in milling frame part of marine diesel engine, combining the development trend of milling technology, the dynamic model for milling the guide plate surface of frame part is built, the experiment modal parameters of spindle-holder with a cutting tool and the guide plate surface are identified. Using dynamic forces and chatter lobes to build constraint conditions, so as to recommend process parameters, which can show guidance to mill the guide plate surface of frame part. Consequently, parameters choosing lied on traditional try cutting is avoided, processing cost is reduced and the chatter free material removal rate (MRR) is improved.

You might also be interested in these eBooks

Manufacturing Automation Technology Development

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 455)

Pages:

417-421

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.455.417

Citation:

Cite this paper

Online since:

December 2010

Authors:

Xi Feng Fang, Chun Qiao Wu, Sheng Wen Zhang, W. Jia, C.Q. Yang, Y.H. Tong

Keywords:

Dynamic Simulation, Frame Guide Plate Surface of Marine Diesel Engine, Milling Process

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] X.F. Han: Marine Diesel Engine (China Communications Press, Beijing 2004), (In Chinese).

Google Scholar

[2] X.F. Fang, C.Q. Wu and S.W. Zhang: Journal of Harbin Institute of Technology (New Series), Vol. 17 (2010) No. 1, pp.30-33.

Google Scholar

[3] S. Engin, Y. Altintas: International Journal of Machine Tools & Manufacture, Vol. 41 (2001) No. 15, pp.2195-2212.

DOI: 10.1016/s0890-6955(01)00045-1

Google Scholar

[4] S. Turner, D. Merdol, Y. Altintas and K. Ridgway: International Journal of Machine Tools & Manufacture, Vol. 47 (2007) pp.1410-1416.

DOI: 10.1016/j.ijmachtools.2006.08.028

Google Scholar

[5] B. Yan, A.P. Xu, D.W. Zhang, et al: Chinese Journal of Mechanical Engineer, Vol. 38 (2002) No. 5, pp.22-26(In Chinese).

Google Scholar

[6] S. Engin, Y. Altintas: International Journal of Machine Tools & Manufacture, Vol. 41 (2001) No. 15, pp.2113-2231.

Google Scholar

[7] S.A. Jensen, Y.C. Shin: Trans of ASME, Journal of Manufacturing Science and Engineering, Vol. 121 (1999), pp.600-605.

Google Scholar

[8] H.Z. Li, G.H. Zhang, et al: Journal of TongJi University, Vol. 28 (2000) No. 1, pp.54-59(In Chinese).

Google Scholar

[9] Y. Altintas, P. Lee: Trans of ASME, Journal of Manufacturing Science and Engineering, Vol. 120 (1998), pp.684-692.

Google Scholar

[10] M.L. Campomanes, Y. Altintas: Trans of ASME, Journal of Manufacturing Science and Engineering, Vol. 125(2003), pp.416-422.

Google Scholar

[11] Y. Altintas: Manufacturing Automation - Metal Cutting Mechanics, Machine tool Vibration and CNC Design (Cambridge University Press, UK 2000).

DOI: 10.1017/cbo9780511843723

Google Scholar