Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Diamond Coated on Cobalt-Deficient Gradient Tungsten Carbide
p.1889
Microstructure and Mechanical Performances of Plasma-Sprayed Functionally Gradient HA-ZrO2-Bioglass Coatings
p.1893
Electrophoretic Deposition of Pb(Zr,Ti)O3 Powders on Silicon Wafer and Sintering Densification Approach
p.1899
Preparation and Characterization of Compositionally Graded Epitaxial Barium Strontium Titanate Thin Films via Scanning Probe Microscopy
p.1903
Raman Spectra Study on Multilayered Compositional Graded (Ba0.8Sr0.2)(Ti1-xZrx)O3 Thin Films
p.1909
Fabrication and Evaluation of PZT/Ag Piezoelectric Composites and Graded Actuator
p.1913
The Preparation and Properties of New Silver-Metal Oxide Graded Composite Electrical Contact Materials
p.1917
Preparation of Multilayer Barium Titanate PTC Thermistor with Low Room Temperature Resistance
p.1921
Application of Ceramics Metal Functionally Graded Materials on Green Automobiles
p.1925

Application of Ceramics Metal Functionally Graded Materials on Green Automobiles

Article Preview

Abstract:

Ceramics metal functionally graded materials (FGM) is applied on the dual friction pair of the green automobiles. The structure and component characteristics of FGM are better, compared with traditional Ceramics. Even with the same components, FGM bears an outstanding mechanical performance and its cracking strength, toughness and fatigue strength are relatively superior. The influence of Ceramics metal functionally graded materials on the performance of automobiles are analyzed via a comparative research and comparison of the external characteristics of automobile is made in terms of mechanism. The results indicate that the power output, fuel consumption and durability are improved considerably on the green automobiles. Improvement is also made on the wearing capability, lubricity and sealing performance as well. Hence comes the reduction of friction loss and leakage loss. The principal abrasion mechanism of FGM is plastic flowing and the secondary are brittle failure and grain abrasion.

You might also be interested in these eBooks
High-Performance Ceramics III View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 280-283)

Pages:

1925-0

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.280-283.1925

Citation:

Cite this paper

Online since:

February 2007

Authors:

Yong Li, Song Jian, Zhi Min

Keywords:

Functionally Graded Material (FGM), Governing Equation, Green Automobiles

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] T. Zhang: Mater Trans JIM Vol. 22 (2000), p.83.

Google Scholar

[2] A. Peter and W.L. Johnson: Appl. Phys. Lett. Vol. 31 (1993), p.32.

Google Scholar

[3] Inue: FGM Aedermansdorf (Trans Tech Publications, Switzerland 1998).

Google Scholar

[4] J.L. Uriarte, A. Le Moulec and A.R. Yavari: Mater. Sci. Forum Vol. 425-427 (2003), p.326.

Google Scholar

[5] J.G. Wang, B.W. Choi, T.G. Nieh and C.T. Liu: J. Mater. Res. Vol. 15 (2000), p.798.

Google Scholar

[6] B. Vigolo: Science Vol. 290 (2000), p.1331.

Google Scholar

[7] Y. Li, J. Song and Z.M. Zhang: Sci. Chin. E Vol. 45 (2002), p.383.

Google Scholar

[8] Y. Li, J. Song and Z.M. Zhang: Sci. Chin. E Vol. 46 (2003), p.1.

Google Scholar

[9] Y. Li, J. Song and Z.M. Zhang: Mater. Sci. Forum Vol. 425-427 (2003), p.777.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved