High-Temperature Diffusion Barrier for Ni-Cr Cast Steel

Agnieszka Kochmańska; Małgorzata Garbiak

doi:10.4028/www.scientific.net/DDF.312-315.595

Paper Titles

Characterization of Microstructure and Properties of Plasma Sprayed Ceramic Coatings on AZ91 Magnesium Alloy
p.571

Characteristics of Thermal Properties of Gd₂Zr₂O₇ – ZrO₂XY₂O₃ Powder Mixtures Intended for Deposition of Gradient Layers of TBC Type
p.577

Characteristics of Phenomena in Powders Type RE₂Zr₂O₇-Al₂O₃ in High Temperature Annealing Conditions
p.583

The Impact of Diffusion Process on the Interface Microstructure in AZ91 Magnesium Matrix Composites Reinforced with TiN Nanolayer Modified Carbon Fibres
p.589

High-Temperature Diffusion Barrier for Ni-Cr Cast Steel
p.595

Real Time Prognostic Strategies: Application to Gas Turbines
p.601

Investigation of the Effect of Electrospun Polyethersulfone Nanofibers in Membrane
p.607

Synthesis and Characterization of PES/TiO₂ Nanofibers Membrane
p.613

Weight Analysis in a Quantum Mechanical Transport Model for Nano and Bio Materials
p.620

HomeDefect and Diffusion ForumDefect and Diffusion Forum Vols. 312-315High-Temperature Diffusion Barrier for Ni-Cr Cast...

High-Temperature Diffusion Barrier for Ni-Cr Cast Steel

Abstract:

The study describes aluminium-silicon protective coatings produced by the slurry cementation process on a substrate of creep-resistant Ni-Cr cast steel. The mechanism of the coating growth on a substrate was examined and the effect of annealing time and temperature on total thickness of the coatings and on the thickness of the individual zones was analyzed. The coating structure is composed of two zones. In the external zone, elements like Al, Ni and Fe are concentrated, forming intermetallic phases of an Al(Ni,Fe) type, while the internal zone contains an (Fe,Cr,Si) solution. The internal zone formed in a sub-surface layer of the substrate has hardness values intermediate between the hardness of the substrate and that of the external layer.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Defect and Diffusion Forum (Volumes 312-315)

Pages:

595-600

DOI:

https://doi.org/10.4028/www.scientific.net/DDF.312-315.595

Citation:

Cite this paper

Online since:

April 2011

Authors:

Agnieszka Kochmańska, Małgorzata Garbiak

Keywords:

Aluminium-Silicon Coating, Austenitic Cast Steel, Slurry Cementation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] S.R.J. Saunders, M. Monteiro and F. Rizzo: Prog. Mater. Sci. Vol. 53 (2008), p.775.

Google Scholar

[2] X. Nan, D. Monceau, D. Young and J. Furtado: Corr. Sci. Vol. 50 (2008), p.2398.

Google Scholar

[3] J. Kubicki and B. Piekarski: Metalurgija Vol. 40 (2001), p.47.

Google Scholar

[4] Y. Wang and W. Chen: Surf. Coat. Tech. Vol. 183 (2004), p.18.

Google Scholar

[5] K. L. Wang, F.S. Chen and G.S. Leu,: Mater. Sci. Eng. A Vol. 357 (2003), p.27.

Google Scholar

[6] J. Kubicki, A. Kochmańska and P. Kochmański: Mater. Sci-Medzg. Vol. 11 (2005), p.120.

Google Scholar

[7] M. Garbiak and B. Piekarski: Int. J. Microstructure Materials Properties Vol. 2 (2007), p.35.

Google Scholar

[8] A. Kochmańska and P. Kochmański: Acta Metallurgica Slovaca, Special Issue No 1 (2007) Kosice, 873-878.

Google Scholar

[9] B. Piekarski: Archives of Foundry Engineering Vol. 8 (2008), p.181.

Google Scholar

[10] A. Kochmańska and J. Kubicki: Archives of Foundry Engineering Vol. 9 (2009), p.129.

Google Scholar

[11] A. Kochmańska, Doctor's thesis, Szczecin University of Technology, Poland, 2006 (in Polish).

Google Scholar

[12] A. Kochmańska, J. Kubicki and P. Kochmański: Inż. Materiałowa No 3, (2006), p.445 (in Polish).

Google Scholar