Research and Application of Medium-Speed Pulverizer Control Based on AGC Mode

Jun Li; Wei Wei Li; Hui Cong Li

doi:10.4028/www.scientific.net/AMR.960-961.974

Paper Titles

Aggregation of Loads with Distribution Network Considered
p.952

Design of a Wide-Area Damping Controller Based on Fuzzy Control
p.960

Distribution Network Planning Based on Multi-Island Group Strategy Genetic Algorithm
p.964

Experimental Investigation of Static Load Characteristics
p.969

Research and Application of Medium-Speed Pulverizer Control Based on AGC Mode
p.974

A Electronic Control Stirling Engine Fuel Supply System Based on Real-Time Operating System
p.978

Research on Flow Transferring Identification Method Based on WAMS
p.982

Research on Setting Adjustment of Line Protection
p.989

Simulation of Transformer Protection Based on an Embedded MATLAB Function
p.995

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 960-961Research and Application of Medium-Speed...

Research and Application of Medium-Speed Pulverizer Control Based on AGC Mode

Abstract:

Large delay is the main characteristics of medium-speed pulverizer system which used in subcritical and supercritical unit. By introducing and analyzing the operating principle and working process, considering energy saving and consumption reducing, and combined with the performance requirement of AGC (Automatic Generation control), recommend solutions were put forward. It can effectively solve AGC control problems of load and pressure control accuracy and ensure frequency stability of the grid, provide a reference for similar units.

You might also be interested in these eBooks

Thermal, Power and Electrical Engineering III

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 960-961)

Pages:

974-977

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.960-961.974

Citation:

Cite this paper

Online since:

June 2014

Authors:

Jun Li*, Wei Wei Li, Hui Cong Li

Keywords:

AGC, Energy Saving and Consumption Reducing, Large Delay, Medium-Speed Pulverizer

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Sigurd Skogestad. Simple analytic rules for model reduction and PID controller tuning. Journal of Process Control 13(2003)291-309.

DOI: 10.1016/s0959-1524(02)00062-8

Google Scholar

[2] Svante, B., & Ljung, L, A survey and comparison of time-delay estimation methods in linear systems, Proc. of the 42nd IEEE Conf. Decision and Control, 2003, pp.2502-2507.

Google Scholar

[3] M. Zhuang, D.P. Atherton, Automatic tuning of optimum PID controllers, IEE ProcD, 140, 1993, pp.216-224.

DOI: 10.1049/ip-d.1993.0030

Google Scholar

[4] Antonio Visioli, A new design for a PID plus feedforward controller, Journal of Process Control, 14, 2004, pp.457-463.

DOI: 10.1016/j.jprocont.2003.09.003

Google Scholar

[5] F. Shinskey, Process Control Systems Application Design Adjustment, McGraw-Hill, New York, (1996).

Google Scholar

[6] D.R. Coyghanowr, Process Systems Analysis and Control, McGraw-Hill, New York, (1991).

Google Scholar

[7] Silva, R.; Sbarbaro, D.; Barra, B.A.L. Closed-loop process identification under PI control: a time domain approach. Ind. Eng. Chem. Res. 2006, 45, 4671-4678.

DOI: 10.1021/ie051229w

Google Scholar

[8] Lee, Y.; Lee, M.; Park, S.; Brosilow, C. PID controller tuning for desired closed-loop responses for SI/SO systems. AIChE J. 1998, 44(1), 106-115.

DOI: 10.1002/aic.690440112

Google Scholar

[9] Panda, R.C. Synthesis of PID tuning rule using the desired closed-loop response. Ind. Eng. Chem. Res. 2008, 47, 8684-8692.

DOI: 10.1021/ie800258c

Google Scholar