Tensile and Thermal Properties of Bambusa arundinacea and Dendrocalamus asper Culm Fibers

Hosta Ardhyananta; Fakhreza Abdul; Widyastuti Widyastuti; Sulistijono Sulistijono; Azman Hassan; Denni Kurniawan

doi:10.4028/www.scientific.net/AMR.845.237

Paper Titles

The Effect of Cannulated Screw Placement Angle in the Management of Femoral Neck Fracture
p.216

Investigation of Intermetallic Phase Formation and Structural Analysis in Annealed Al/Cu Bilayer Thin Films
p.221

Improvement of Cylinder Buckling Knockdown Factor through Imperfection Sensitivity
p.226

Mathematical Modeling of Decarburization and Oxidation during Reheating Process of SAE1070 Steel Billets
p.231

Tensile and Thermal Properties of Bambusa arundinacea and Dendrocalamus asper Culm Fibers
p.237

XRD Investigations on Film Thickness and Substrate Temperature Effects of DC Magnetron Sputtered ZnO Films
p.241

In Vitro Analysis of Hydroxyapatite Coated Bio-Additive Manufactured Implant
p.246

The Effects of Solution Baths to the Microstructure and Thickness of Ni-Ti Plating by High Speed Plating
p.251

Characterization of Nigerian Clay as Porous Ceramic Material
p.256

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 845Tensile and Thermal Properties of Bambusa...

Tensile and Thermal Properties of Bambusa arundinacea and Dendrocalamus asper Culm Fibers

Abstract:

Fibers from the culms of Bambusa arundinacea and Dendrocalamus asper were extracted mechanically and chemically treated using alkaline solution. Tensile and thermal properties of both bamboo fibers were examined. Tensile test on the bamboo fibers showed that Bambusa arundinacea fibers have higher strength and stiffness yet lower elongation than Dendrocalamus asper fibers. When the fibers were chemically treated, similar trend on tensile properties was observed but at lower magnitude compared to those shown by untreated fibers. Further characterization revealed that Bambusa arundinacea fibers are of higher fiber diameter and higher cellulose content compared to Dendrocalamus asper fibers. Thermogravimetric analysis showed that both fibers with same treatment have similar thermal stability, with chemically treated fibers are of higher thermal stability than untreated ones. The chemical treatment removed the lignin from the fiber structure, and affected tensile and thermal properties of both bamboos fibers.

You might also be interested in these eBooks

Materials, Industrial, and Manufacturing Engineering Research Advances 1.1

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 845)

Pages:

237-240

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.845.237

Citation:

Cite this paper

Online since:

December 2013

Authors:

Hosta Ardhyananta*, Fakhreza Abdul, Widyastuti Widyastuti, Sulistijono Sulistijono, Azman Hassan, Denni Kurniawan

Keywords:

Bamboo, Cellulose, Fiber, Tensile Properties

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Abdul Khalil, H.P.S., Bhat, I.U.H., Jawaid, M., Zaidon, A., Hermawan, D., Hadi, Y.S., Bamboo fibre reinforced biocomposite : a review. Materials and Design, 42 (2012) 353-368.

DOI: 10.1016/j.matdes.2012.06.015

Google Scholar

[2] Amada, S., Ichikawa, Y., Munekata, T., Yukito, Fiber texture and mechanical graded structure of bamboo. Composites Part B, 28B (1997) 13-20.

DOI: 10.1016/s1359-8368(96)00020-0

Google Scholar

[3] Phong, N.T., Fujii, T., Chuong, B., Okubo, K., Study on how to effectively extract bamboo fibers from raw bamboo and wastewater treatment. Journal of Materials Science Research, 1 (2012) 144-155.

DOI: 10.5539/jmsr.v1n1p144

Google Scholar

[4] Kurniawan, D., Kim, B.S., Lee, H.Y., Lim, J.Y., Effects of repetitive processing, wood content, and coupling agent on the mechanical, thermal, and water absorption properties of wood/polypropylene green composites. Journal of Adhesion Science and Technology, 27 (2013).

DOI: 10.1080/01694243.2012.695948

Google Scholar

[5] Khosrow, G., Bamboo as reinforcement in structural concrete elements. Cement & Concrete Composites, 27 (2005) 637–649.

DOI: 10.1016/j.cemconcomp.2004.06.002

Google Scholar

[6] Sun, J.X., Sun, X.F., Zhao H., Sun, R.C., Isolation and characterization of cellulose from sugarcane bagasse. Polymer Degradation and Stability, 84 (2004) 331-339.

DOI: 10.1016/j.polymdegradstab.2004.02.008

Google Scholar

[7] Yang D., Zhong L.X., Yuan, T.Q., Peng X.W., Sun, R.C., Studies on the structural characterization of lignin, hemicellulose and cellulose fractioned by ionic liquid followed by alkaline extraction from bamboo. Industrial Crops and Products, 43 (2013).

DOI: 10.1016/j.indcrop.2012.07.024

Google Scholar