Factors Evalution of Particle Size Distribution of Heavy Oil Emulsion

Nan Ning Wei

doi:10.4028/www.scientific.net/AMR.800.389

Paper Titles

Effect of Cathodic Protection Systems with Zn-Mesh Sacrificial Anodes on Reinforced Concrete Structures in an Accelerated Marine Environment
p.365

Influence of Heat Treatment on the Microstructures and Properties of Mg-12Li-3Gd-3Y-0.6Zr Alloy
p.375

Microstructures and Mechanical Properties of Magnesium-Lithium Alloys by Homogenizing Treatment and Thermal Process
p.379

Study on Short Basalt Fiber Reinforced Silicone Rubber Composites
p.383

Factors Evalution of Particle Size Distribution of Heavy Oil Emulsion
p.389

Low-Temperature Hydrothermal Synthesis and Electrochemical Properties of Birnessit-Type Manganese Dioxide Nanosheets
p.393

Structural, Magnetic, and Transport Properties of La_0.62Sb_0.38MnO₃ Ceramic
p.398

Optical Properties of Water-Soluble Er-Doped ZnS Quantum Dots Synthesized by a Hydrothermal Process
p.402

Preparation of PANI Nanotubes by Template Electrosynthesis
p.406

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 800Factors Evalution of Particle Size Distribution of...

Factors Evalution of Particle Size Distribution of Heavy Oil Emulsion

Abstract:

Used the heavy oil of Du 84 well 53-55 in Liaohe oil field, the impact factors of the heavy oil emulsion size distribution were analyzed. The higher concentration of emulsifier, the smaller size of average particle emulsion and the particle size distribution tends to be more uniform. With the stirring rate increasing the size distribution tends to be uniform first then tend to be disperse, and the time used would be shorter to reach equilibrium with agitation rate being faster.With prolong of the stirring time the particle size distribution of the emulsion trends to be more uniform. After emulsifier 0.3%LZC-C-02 being added in heavy oil it will become O/W emulsion and the external phase is water and the viscosity of the emulsion is small with good flowability.

You might also be interested in these eBooks

Recent Development on Material Science and Environmental Material

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 800)

Pages:

389-392

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.800.389

Citation:

Cite this paper

Online since:

September 2013

Authors:

Nan Ning Wei

Keywords:

Heavy Oil Emulsion, Particle Size Distribution, Stirring Rate

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Yuxiang Chen, Jun Chen, Cheng-song Pan. Influence of asphaltenes and resins on the stability of heavy crude emulsions[J]. Applied Chemical Industry, 2009, 299(12): 114-121.

Google Scholar

[2] Aston M, Mihalik P, Tunbridge J. Towards zero fluid loss oil based muds[A]. SPE 77446, (2002).

DOI: 10.2118/77446-ms

Google Scholar

[3] Gunnar Fimreite, Arne Asko, Jarrod Massam. Invert emulsion fluids for drilling through narrow hydraulic windows[A]. SPE8712, (2004).

DOI: 10.2118/87128-ms

Google Scholar

[4] Pekdemir T, Copur M, Urum K. Emulsification of crude oil-water systems using biosurfactants [J]. Process Safety Environ. Prot, 2005, 83(B3): 38-46.

DOI: 10.1205/psep.03176

Google Scholar