[1]
R. P. Lottman: Transportation Research Board, NCHRP Report 192, October 1978.
Google Scholar
[2]
Transportation Research Board (TRB), February 2003, Moisture Sensitivity of Asphalt Pavements, A National Seminar, San Diego, California.
Google Scholar
[3]
Hicks, R. (1991). "Moisture damage in asphalt concrete." NCHRP synthesis of highway practice 175, Washington (DC): Transportation Research Board, National Research Council.
Google Scholar
[4]
Huang, B., Shu, X., Dong, Q., and and Shen, J. (2010) "Laboratory Evaluation of Moisture Susceptibility of Hot-Mix Asphalt Containing Cementitious Fillers." Journal of Materials in Civil Engineering, ASCE, 667.
DOI: 10.1061/(asce)mt.1943-5533.0000064
Google Scholar
[5]
Sebaaly, P., Hitti,H. and Weitzel, D. (2002). "Effectiveness of Lime in Hot Mix Asphalt Pavements." 82nd Annual Meeting of the Transportation Research Board, November 12, 2002.
DOI: 10.3141/1832-05
Google Scholar
[6]
Putman, B., and Amirkhanian, S. (2006). "Laboratory Evaluation of Anti-Strip Additivesin Hot Mix Asphalt." Report No. FHWA-SC-06-07, South Carolina Department of Transportation, November 10, 2006.
Google Scholar
[7]
Kandhal P. and Rickards, I. (2001) "Premature Failure of Asphalt Overlays from Stripping: Case Histories." NCAT Report 01-01, Annual meeting of the Association of Asphalt Paving Technologists held in Clear Water, Florida (March 19-21, 2001)
Google Scholar
[8]
Burak Sengoz and Giray Isikyakar (2008). "Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen". Construction and Building Materials, 22 (9) p.1897–1905.
DOI: 10.1016/j.conbuildmat.2007.07.013
Google Scholar
[9]
Airey, G.D.: Styrene-butadiene-styrene polymer modification of road bitumens. J. Mat. Sci. 39, 951–959 (2004)
DOI: 10.1023/b:jmsc.0000012927.00747.83
Google Scholar
[10]
Isacsson, U and Lu, X (1999) "Laboratory investigations of polymer modified bitumens". Journal of the Association of Asphalt Paving Technologists, 68, pp.35-63.
Google Scholar
[11]
Kiridena, W., Jain, V., Kuo, P., and Liu, G. Y. (1998). "Nanometer scale elasticity measurements on organic monolayers using scanning force microscopy." Surf. Interface Anal., 25, 383–389.
DOI: 10.1002/(sici)1096-9918(199706)25:6<383::aid-sia246>3.0.co;2-s
Google Scholar
[12]
Legge, N. R., Holden, G., and Schroeder, H. E. (1987). Thermoplastic elastomers: A comprehensive review, Hanser Publishers, Germany.
Google Scholar
[13]
Burnham, N. A., and Kulik, A. J. (1997). "Surface force and adhesion." Handbook of mico/nanotribiology, B. Bhushan, ed., CRC, Boca Raton, Fla.
Google Scholar
[14]
Kim, M-G, Button, J W and Park, D-W (1999) "Coatings to improve low-quality local aggregates for hot mix asphalt pavements" College Station, Tex. : Southwest Region University Transportation Center, Texas Transportation Institute, Texas A&M University, p.52.
Google Scholar
[15]
Y. Becker, M.P. Méndez, Y. Rodríguez "Polymer modified asphalt" Vis Technol, 9 (1) (2001), p.39–50
Google Scholar
[16]
G. King et al. "Additives in asphalt" J Assoc Asphalt Paving Technol A, 68 (1999), p.32–69
Google Scholar
[17]
Roque R, Birgisson B, Tia M, Kim B, Cui Z. Guidelines for the use of modifiers in Superpave mixtures: Executive summary and volume 1 of 3 volumes: Evaluation of SBS modifier. State Job 99052793. Florida Department of Transportation, Tallahassee, FL, (2004)
Google Scholar
[18]
Wegan, V., and Nielsen, B. C. (2001). "Microstructure of polymer modified binders in bituminous mixtures." Report Number 87-90145-85-8. Danish Road Directorate, Roskilde, Denmark, 2001.
Google Scholar
[19]
Chen, J.S., Liao, M.C., and Shiah, M.S. (2002). "Asphalt Modified by Styrene–Butadiene–Styrene Triblock Copolymer: Morphology and Model." J Mater Civil Eng, 14 (3), 224–9.
DOI: 10.1061/(asce)0899-1561(2002)14:3(224)
Google Scholar
[20]
Shukla, R. S., Singh, V. K. P., and Bhanwala, R. S. (2003). "Polymer modified bitumen for construction of heavy traffic density corridors." Indian Highways, 31(4), 55–66.
Google Scholar
[21]
USGS Annual Commodity Mineral Yearbook, Lime, Table 4, 2004.
Google Scholar
[22]
Information on http://www.internationallime.org/doc/BERGER%20Eric.doc
Google Scholar
[23]
Little, D.N. and Jones, D.R. (2003). "Chemical and Mechanical Mechanisms of Moisture Damage in Hot Mix Asphalt Pavements." National Seminar in Moisture Sensitivity, San Diego, California.
Google Scholar
[24]
Robertson, R. E. (2000). "Chemical Properties of Asphalts and Their Effects on Pavement Performance." Transportation Research Circular Number 499, Transportation Research Board, National Research Council.
Google Scholar
[25]
Petersen, C. J. and Plancher, H., (1998). "Model Studies and Interpretive Review and The Competitive Adsorption and Water Displacement of Petroleum Asphalt Chemical Functionalities on Mineral Aggregate Surfaces." Petroleum Sci. & Technology, 16, 89-131.
DOI: 10.1080/10916469808949774
Google Scholar
[26]
Park, S., Jo, M.C., and Park, J.B. (2000). "Adsorption and Thermal Desorption Behavior of Asphalt-Like Functionalities on Silica." Adsorption Science & Technology, 18, 675-684.
DOI: 10.1260/0263617001493729
Google Scholar
[27]
Biggs, S. and Mulvaney, P. (1994). "Measurement of the Forces Between Gold Surfaces in Water by Atomic Force Microscopy." J. Chem. Phys., 100(11), 501-505.
DOI: 10.1063/1.466748
Google Scholar
[28]
Knoell, T., Safarik, J., Cormack, T., Riley, R., Lin, S. W., and Ridgway, H. (1999). "Biofouling Potentials of Microporous Polysulfone Membranes Containing A Sulfonated Polyether-Ethersulfone: Correlation of Membrane Surface Properties with Bacterial Attachment." J. Memb. Sci., 157, 17-138.
DOI: 10.1016/s0376-7388(98)00365-2
Google Scholar
[29]
Vaidya, A., and Chaudhury, M. K. (2002). "Surface Studies on Polyurethanes Containing Perfluoropolyether, Polydimethylsiloxane and Polyethyleneglycol Segments." J. Colloid Interface Sci, 249, 235.
Google Scholar
[30]
Tian, Z., Jiao, N., Liu, L., Wang, Y., Dong, Z., Xi, N, and Li W. (2004). "An AFM Based Nanomanipulation System With 3D Nano Forces Feedback." International Conf. on Intelligent Automation on Mechatronics, China.
DOI: 10.1109/icima.2004.1384154
Google Scholar