Air Entrapment Simulation in the Resin Transfer Molding of Industrial Applications

[1] N.C.W. Judd and W.W.W. Wright : Voids and their effects on the mechanical properties of composites – an appraisal, in SAMPE J, 14, p.10–14, (1978).

Google Scholar

[2] S. Feldgoise, M.F. Foley, D. Martin, and J. Bohan: The effect of microvoid content on composite shear strength, in the 23rd international SAMPE technical conference, p.259–273, (1991).

Google Scholar

[3] K.J. Bowles and S. Frimpong : Void effects on the interlaminar shear strength of unidirectional graphite-fiber-reinforced composites, in Journal of Composite Materials, 26(10), p.1487–1509, (1992).

DOI: 10.1177/002199839202601006

Google Scholar

[4] T.S. Lundstrom, B.R. Gebart, and C.Y. Lundemo : Void formation in RTM, in The 49th annual conference, Composite Institute of the Society of the Plastics Industry, Session 16-F, (1992).

Google Scholar

[5] N. Patel, and L.J. Lee : Effect of fiber mat architecture on void formation and removal in liquid composite molding, in Polymer Composites, 16(5), p.386–399, (1995).

DOI: 10.1002/pc.750160507

Google Scholar

[6] N. Patel, V. Rohatgi, and L.J. Lee : Modeling of void formation and removal in liquid composite molding, part II: model development, in Polymer Composites, 17(1), p.104–114, (1996).

Google Scholar

[7] M.K. Kang, W.I. Lee, and H.T. Hahn : Formation of microvoids during resin-transfer molding process, in Composites Science and Technology, 60, p.2427–2434, (2000).

DOI: 10.1016/s0266-3538(00)00036-1

Google Scholar

[8] D.H. Lee, W.I. Lee and M.K. Kang : Analysis and minimization of void formation during resin transfer molding process, in Compos Science and Technology, 66(16), p.3281–3289, (2006).

DOI: 10.1016/j.compscitech.2005.07.008

Google Scholar

[9] M.K. Kang, W.I. Lee, and H.T. Hahn : Analysis of vacuum bag resin transfer molding process, in Composite Part A, 32, pp.1553-1560, (2001).

DOI: 10.1016/s1359-835x(01)00012-4

Google Scholar

[10] C.H. Park, A. Lebel, A. Saouab, J. Breard, and W.I. Lee : Modeling and simulation of voids and saturation in liquid composite molding processes, in Composite Part A, 42, pp.658-668, (2011).

DOI: 10.1016/j.compositesa.2011.02.005

Google Scholar

[11] M.K. Kang, W.I. Lee, J.Y. Yoo and S.M. Cho : Simulation of mold filling process during resin transfer molding, Journal of Materials Processing and Manufacturing Science, 3, pp.297-313, (1995).

Google Scholar

[12] Kang, M. K. A numerical and experimental study on the mould filling and void formation during resin transfer moulding. PhD thesis, Seoul National University, (1997).

Google Scholar

[13] Shin, S., & Lee, W. I. Finite element analysis of incompressible viscous flow with moving free surface by selective volume of fluid method. International Journal of Heat and Fluid Flow, 21, 197-206, (2000).

DOI: 10.1016/s0142-727x(99)00083-1

Google Scholar