[1]
M. Ristivojević, R. Mitrović, Load Distribution - Gear pairs and roller bearings, Monograph, Faculty of Mechanical Engineering in Belgrade, (2002).
Google Scholar
[2]
R. Stribeck, Ball Bearings for Various Loads, Trans. ASME 29 (1907) 420-463.
Google Scholar
[3]
International Standard ISO-76: 1987 Rolling Bearings – Static Load Ratings, International Standards Organizations, (1987).
Google Scholar
[4]
International Standard ISO-76: 2006 Rolling Bearings – Static Load Ratings, International Standards Organizations, (2006).
Google Scholar
[5]
H. Sjoväll, The Load Distribution within Ball and Roller Bearings under Given External Radial and Axial Load, Teknisk Tidskrift, Mek., h. 9. (1933).
Google Scholar
[6]
A.B. Jones, A General Theory for Elastically Constrained Ball and Roller Bearings under Arbitrary Load and Speed Conditions, ASME Journal of Basic Engineering. (1960) 309-320.
DOI: 10.1115/1.3662587
Google Scholar
[7]
M.P. Kovalev, M.Z. Narodetsky, Calculation of precision ball bearings, Mechanical Engineering, Moscow, (1975).
Google Scholar
[8]
T.A. Harris, M.N. Kotzalas, Rolling Bearing Analysis, Taylor & Francis Group, SAD, (2007).
Google Scholar
[9]
L. Houpert, A Uniform Analytical Approach for Ball and Roller Bearing, Proceedings at the STLE/ASME Tribology Conference, San Francisco, ASME Jour. of Trib. (1997) p.119, 851-857.
DOI: 10.1115/1.2833896
Google Scholar
[10]
A. Palmgren, Ball and Roller Bearing Engineering, 3rd Ed., Burbank, Philadelphia, 1959, p.49–51.
Google Scholar
[11]
U. Grünberg, Studies of the interaction between the outer ring of housing on the carrying capcity of radially loaded cylindrical roller bearings, Part 1: Theoretical basis and calculation. Construction 22(2), (1970) pp.48-55.
Google Scholar
[12]
U. Grünberg, Studies of the interaction between the outer ring of housing on the carrying capcity of radially loaded cylindrical roller bearings, Part 2: Practical application and results. Construction 22(3), (1970) pp.97-103.
Google Scholar
[13]
R. Mitrović, Analysis of the influence of elastic deformations and internal radial clearance of deep groove ball bearings on load distribution between rolling elements, M. Sc. Thesis, Faculty of Mechanical Engineering in Belgrade, (1987).
Google Scholar
[14]
R. Mitrović, Investigation of the influences of design and tribology parameters on the operating characteristics of high speed ball bearings, PhD Thesis, Faculty of Mechanical Engineering in Belgrade, (1992).
Google Scholar
[15]
R. Mitrović, Analysis of the influence of internal radial clearance on the static load rating of the rolling bearing, Facta Universitatis, Series: Mechanical Engineering 1(8) (2001) 1039 – 1047.
Google Scholar
[16]
R. Mitrovic, M. Ristivoevic, T. Lazovic, Load distribution between rolling elements of deep groove ball bearings, Journal of Mechanical Engineering, 3 (2000) 14-17.
Google Scholar
[17]
T. Lazović, The analysis of the influence of deep groove ball bearing geometry on the load distribution and stiffness, M. Sc. Thesis, Faculty of Mechanical Engineering in Belgrade, (2000).
Google Scholar
[18]
T. Lazović, Influence of internal radial clearance of rolling bearing on load distribution between rolling elements, Journal of Mechanical Engineering Design. 4(1) (2001) 25-32.
Google Scholar
[19]
T Lazović, M. Ristivojević, R. Mitrović, Mathematical Model of Load Distribution in Rolling Bearing, FME Transactions. 36 (2008) 189-196.
Google Scholar
[20]
X. Hernot, M. Sartor, J. Guillot, Calculation of the Stiffness Matrix of Angular Contact Ball Bearings by Using the Analytical Approach, ASME Journal of Mechanical Design. 122(1) (2000) 83-90.
DOI: 10.1115/1.533548
Google Scholar
[21]
M.C. Ricci, Internal loading distribution in statically loaded ball bearings subjected to an eccentric thrust load, Mathematical Problems in Engineering, 2009, Article ID 471804, doi: 10. 1155/2009/471804.
DOI: 10.1155/2009/471804
Google Scholar
[22]
M.C. Ricci, Internal loading distribution in statically loaded ball bearings subjected to a combined radial and thrust load, including the effects of temperature and fit, Proceedings of World Academy of Science, Engineering and Technology, Amsterdam. 57 (2009).
DOI: 10.1155/2009/471804
Google Scholar
[23]
R. Tomovic, Research of the impact of rolling bearing construction parameters on their correct working condition, Ph.D. Thesis, Faculty of Mechanical Engineering, University of Nish, (2009).
Google Scholar
[24]
R. Tomović, Calculation of the boundary values of rolling bearing deflection in relation to the number of active rolling elements, Mechanism and Machine Theory. 47 (2012) 74-88.
DOI: 10.1016/j.mechmachtheory.2011.08.006
Google Scholar
[25]
R. Tomović, Calculation of the necessary level of external radial load for inner ring support on q rolling elements in a radial bearing with internal radial clearance, International Journal of Mechanical Science. 60 (2012) 23-33.
DOI: 10.1016/j.ijmecsci.2012.04.002
Google Scholar
[26]
R. Tomović, V. Miltenović, M. Banić, A. Miltenović, Vibration response of rigid rotor in unloaded rolling element bearing, International Journal of Mechanical Sciences. 52(9) (2010) 1176-1185.
DOI: 10.1016/j.ijmecsci.2010.05.003
Google Scholar
[27]
V.A. Smirnov, Rolling bearing vibration diagnosis of NK-12ST pumping unit GPA-C-6. 3. Information on http: /www. vibration. ru/12nks/12nks. shtml, 12. 05. (2010).
Google Scholar
