Preparation and Characterization of Polyacrylonitrile-Based Nanofibers by Electrostatic Spinning

Si Yu Li; Yan Wei Wang; Tan Wen Jun

doi:10.4028/www.scientific.net/AMR.591-593.1042

Paper Titles

Synthesis of Bauxite Based β-SiAlON by Compound Reduction Nitridation
p.1026

Study on Corrosion Behavior of Various Steels Used by Ocean Wave Energy Equipment
p.1030

Microstructure and Creep Resistance of Mg-(8-12 Wt.%) Zn-(2-6 Wt.%) Al Alloys
p.1034

Finite Element Simulation on Micro-Forging Process Inhibiting Warping of the Thin-Walled Components Treated by Laser Cladding
p.1038

Preparation and Characterization of Polyacrylonitrile-Based Nanofibers by Electrostatic Spinning
p.1042

Corrosion Characteristics of 16Mn and Q235B Steel in Natural Seawater
p.1046

Dynamical Identification Model of Laser Cladding Height in Metal Parts Laser Shaping Process
p.1050

Tribological Properties and Worn Surface Analysis Generated by Sulfur- and Phosphorus-Free Molybdenum-Containing Water-Based Lubricant
p.1054

Glass Fiber Functional Warp Sizing
p.1058

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 591-593Preparation and Characterization of...

Preparation and Characterization of Polyacrylonitrile-Based Nanofibers by Electrostatic Spinning

Abstract:

PAN and P(AN-co-MA) nanofibers have been successfully prepared by electrospinning. The mass concentration is 6%-12%, voltage of 15-25 kV, tip-to-collector distance is 25 cm. The morphology of the obtained samples was measured by a Scanning electron microscopy (SEM). The results showed that there were some large beads distributed on the PAN fiber skeleton when the spinning solution concentration is low. With the spinning solution concentration increased, the bead structure is gradually reduced. The fiber diameter increased with the concentration. For the synthetic reaction mixture P(AN-co-MA), it could obtain uniform nanofibers easily

You might also be interested in these eBooks

Manufacturing Engineering and Automation II

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 591-593)

Pages:

1042-1045

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.591-593.1042

Citation:

Cite this paper

Online since:

November 2012

Authors:

Si Yu Li, Yan Wei Wang, Tan Wen Jun

Keywords:

Electrostatic Spinning, Nanofiber, pan

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] S.A. Theron, E. Zussman, and A.L. Yarin: Polymer, Vol. 45 (2004) p. (2017).

Google Scholar

[2] J.J. Ge, H.Q. Hou, Q. Li, M.J. Graham, A. Greiner, D.H. Reneker, F.W. Harris and S.Z.D. Cheng: J. Am. Chem. Soc., Vol. 126 (2004) p.15754.

Google Scholar

[3] F. Yang, R. Murugan, S. Wang and S. Ramakrishna: Biomaterials, Vol. 26 (2005) p.2603.

Google Scholar

[4] T. Yang, Y.Y. Yao, Y. Lin, B. Wang, R.L. Xiang, Y.R. Wu and D.C. Wu: Appl Phys A, Vol. 98 (2010) p.517.

Google Scholar

[5] R.L. Fischer, M.G. McCoy and S.A. Grant: J Mater Sci: Mater Med , Vol. 23 (2012) p.1645.

Google Scholar

[6] H.W. Kim, H.S. Yu, H.H. Lee and J. Biomed: Mater. Res. A, Vol. 87 (2008) p.25.

Google Scholar

[7] J. Lannutti, D. Reneker, T. Ma, D. Tomasko and D. Farson: Mater Sci Eng C, Vol. 27 (2007) p.504.

Google Scholar

[8] W. Cui, X. Li, S. Zhou, J. Weng: J Appl Polym Sci, Vol. 103 (2007) p.3105.

Google Scholar

[9] R. Nirmala, J.W. Jeong, H.J. Oh, R. Navamathavan, M. El-Newehy, S.S. Al-Deyab and H.Y. Kim: Fibers and Polymers, Vol. 12 (2011) p.1021.

DOI: 10.1007/s12221-011-1021-4

Google Scholar

[10] N. Bhattarai, Z.S. Li, D. Edmondson and M.Q. Zhang, Adv. Mater: Vol. 18 (2006) p.1463.

Google Scholar

[11] D. Li and Y.N. Xia: Adv. Mater., Vol. 16 (2004) p.1151.

Google Scholar

[12] G. Eda and S. Shivkumar: J Mater Sci, Vol. 41 (2006) p.5704.

Google Scholar