Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Identification of Tight Spots to an Automatic Mechanical Assembly Line, by Simulation WINQSB
p.1625
Implementation of RFID-Based Access Control Management System
p.1630
Indoor Navigation and Guidance of an Autonomous Robot Vehicle by Using Wireless (ZigBee) Cummunication
p.1634
Logic Design of Improved Backup Power Automatic Switching Considering the Influence of Small Hydropower Stations
p.1638
Manufacturing Using Robot
p.1643
New Inverter Fault Current Limiting Method by Considering Microgrid Control Strategy
p.1647
Off-Line Programming of Industrial Robots Using Co-Located Environments
p.1654
Performances Evaluation for a Reversed Quasi-Carnot Cycle (Refrigeration Machine) by Using the Direct Method from Finite Speed Thermodynamics
p.1658
PID Parameters Tuning Based on Wavelet Neural Network for Automatic Voltage Regulator Control System
p.1663

Manufacturing Using Robot

Article Preview

Abstract:

Paper describes the robots employment to surface manufacturing. In experiments were used IRb60 robot with modernized computer control system. Presented examples of robots using with stationary, rotational and inject tools. Stationary tools were used to cutting polystyrene foam and turning. Rotational, tool with its own drive, was used to milling and grinding mould surface. Inject tool was used to rapid prototyping using polyurethane foam.

You might also be interested in these eBooks
Advanced Materials Research II View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 463-464)

Pages:

1643-1646

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.463-464.1643

Citation:

Cite this paper

Online since:

February 2012

Authors:

Tadeusz Mikolajczyk

Keywords:

Grinding, Industrial Robot, Manufacturing, Milling, Surface Scanning

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Y. H. Chen, Y. N. Hu, Implementation of a robot system for sculptured surface cutting. Part 1. Rough Machining. Int. J. Adv. Manuf. Technology, v. 15, (1999), pp.624-629.

DOI: 10.1007/s001700050111

Google Scholar

[2] Y. N. Hu, Y. H. Chen, Implementation of a robot system for sculptured surface cutting. Part 2. Finish Machining. " Int. J. Adv. Manuf. Technology, v. 15, (1999), pp.630-639.

DOI: 10.1007/s001700050112

Google Scholar

[3] H. Latos, T. Mikolajczyk, Virtual aid design of geometric and kinematics flexible tools XII Workshop on Supervising and Diag. of Mach. Sys., Virt. Manuf., Karpacz, Poland, (2001), pp.145-152.

Google Scholar

[4] J. Honczarenko, Roboty przemysłowe. Budowa i zastosowanie. WNT, Warszawa, (2004).

Google Scholar

[5] T. Mikolajczyk, Robot application to surface finishing. Journal of Polish CIMAC, vol. 5, nr 3 (2010), pp.107-113.

Google Scholar

[6] T. Mikolajczyk, The robot machining system with surface shape active control". OPTIROB'2007, Predeal, Romania, University POLITEHNICA, of Bucharest, (2007), pp.205-209.

Google Scholar

[7] T. Mikolajczyk, Rapid prototyping using robot, 10th international conference Automation/Robotics in Theory an Practice, ROBTEP'2010, Slovakia, Bardeov, (2010) pp.201-206.

Google Scholar

[8] T. Mikolajczyk. Robot Turner, OPTIROB'2010., OPTIROB'2010, Calimenea, Romania, University POLITEHNICA, of Bucharest, (2010), pp.

Google Scholar

[9] T. Mikolajczyk, P. Milko, Shaping polystyrene foam products using robot. OPTIROB'2006., Predeal, Romania, University POLITEHNICA, of Bucharest, (2006), pp.261-264.

Google Scholar

[10] H. Latos, T. Mikolajczyk, Surface shaping with industrial robot. OPTIROB-2006, Predeal, Romania, University POLITEHNICA, of Bucharest, (2006), pp.265-269.

Google Scholar

[11] www. delcam. com/powermill/symulation. htm.

Google Scholar

[12] www. irbcam. com.

Google Scholar

[13] www. robots. com. contacts. htm.

Google Scholar

[14] H. Latos, Elastycznosc geometryczno-kinematyczna narzedzi skrawających. Wydawnictwo Uczelniane Akademii Techniczno-Rolniczej, Bydgoszcz, (1997).

Google Scholar

[15] T. Mikolajczyk, Modernization of IRb60 industrial robot steering system. OPTIROB'2007, Predeal, Romania, University POLITEHNICA, of Bucharest, (2007), pp.149-152.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved