Study on Drifting Drilling Assembly and Casing String’s Stiffness Ratio

Xiao Dong Zhang; Ru Yi Gou; Hong Jun Liang; Yan Gong; Ping Xiao

doi:10.4028/www.scientific.net/AMR.339.583

Paper Titles

The Structure and Technical Parameters Analysis of Snubbing Unit
p.566

Kernel Orthogonal Neighborhood Preserving Discriminant Analysis
p.571

Process and Corrosion Resistance of Plasma-Sprayed NiCoCrAlY/(Al₂O_3-13%TiO₂) Coatings on AZ91D Magnesium Alloy
p.575

Research and Application of Expansion Evaluation Device for Solid Expandable Tubular
p.579

Study on Drifting Drilling Assembly and Casing String’s Stiffness Ratio
p.583

Design Research of the Hydraulic Stopple Plugging Machine for Pipeline Maintenance under Pressure
p.590

Design of down-Hole Oil-Water Separation and Reinjection in the same Well System with Surface Driving Single Screw Pump
p.595

Gas Solubility Measurement for Waxy Crude Oil Saturated with Nitrogen and Natural Gas
p.603

Pressure Vessel CAPP Management System Research Based on Network
p.607

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 339Study on Drifting Drilling Assembly and Casing...

Study on Drifting Drilling Assembly and Casing String’s Stiffness Ratio

Abstract:

Drilling technology of ultra-deep well is still the focal point of drilling research, there are many difficulties in ultra-deep well drilling, such as bottom hole with high temperature and high pressure, complex geology, borehole with sharp dogleg, etc. These technical difficulties put forward higher request in casing running, well quality must be controlled strictly in order to run larger diameter combination casing string successfully. Well quality is closely linked with the drifting drilling assembly design. The accurate stiffness ratio calculation is the key prerequisite of drifting drilling assembly design. In this paper, a new mechanical model is applied to simulate deflection of the drifting drilling assembly. The solution of variable cross-section beam’s equivalent stiffness is applied to solve the stiffness of the drifting drilling assembly. Modified stiffness ratio calculation method for drifting drilling assembly and casing string is proposed. In the process of calculation formula derivation, the conservation of energy law has been used multiple times. At last, the VB computer program is compiled, which contains the modified calculation method. The computer program calculation value is larger than the conventional method’s calculation value. Modified calculation method is more reasonable, which has important significance for drifting drilling assembly optimal design.