Fabrication Study on Rectangular Luminous Layer for Field Emission Display Panel

Yong Sheng Zhu; Chun Tao Bai; Dong Feng Zhou; Qian Wang

doi:10.4028/www.scientific.net/AMR.322.152

Paper Titles

Vapor Compress Flash: Synthesis and Progress on Seawater Desalination Methods
p.134

Influence of Flux on Sintering Property of Imported Hematite Ore
p.139

Study on Three-Dimensional Fluorescence Spectra of Oil Concentration in Water
p.144

Application of 3-D Fluorescence Spectrum and PARAFAC Method in Petroleum Pollutant Measurement and Identification
p.148

Fabrication Study on Rectangular Luminous Layer for Field Emission Display Panel
p.152

Fabrication Research on the Panel Packaging for FED with Carbon Nanotube Emitters
p.156

Composition and Antimicrobial Activity of the Essential Oil of a Wild Kiwi
p.160

Research on Harbor Oily Wastewater Treatment by Fenton Oxidation
p.164

Repair of Rabbit Facial Nerve with Amniotic Extracellular Matrix Based on Biological Material
p.169

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 322Fabrication Study on Rectangular Luminous Layer...

Fabrication Study on Rectangular Luminous Layer for Field Emission Display Panel

Abstract:

Using carbon nanotube as field emitter, the field emission display (FED) panel with rectangular luminous layer was fabricated. The etched indium tin oxide (ITO) film was used as the ITO electrodes, and the phosphor powder was prepared to form the phosphor layer, so the rectangular luminous layer was fabricated on the anode back plane. In one anode pixel, the three anode sub-pixels would be included, which would reside on the same ITO electrode surface. The insulation layer would separate the adjacent anode sub-pixels and the adjacent ITO electrode, and the fabricated anode extension line was mainly used to reduce the excessive voltage drop. The FED panel with rectangular luminous layer possessed good field emission characteristic and high image brightness.

You might also be interested in these eBooks

Advanced Research on Material Science, Environmental Science and Computer Science

View Preview

Info:

Periodical:

Advanced Materials Research (Volume 322)

Pages:

152-155

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.322.152

Citation:

Cite this paper

Online since:

August 2011

Authors:

Yong Sheng Zhu, Chun Tao Bai, Dong Feng Zhou, Qian Wang

Keywords:

Anode Pixel, Fabrication, Panel

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Alexander A. Kuznetzov, Sergey B. Lee, Mei Zhang, et al. Carbon, Vol. 48 (2010), p.41.

Google Scholar

[2] Fang-Hsing Wang, Tzu-Ching Lin, Shien-Der Tzeng, et al. Applied surface science, Vol. 256 (2010), p.7600.

Google Scholar

[3] P. S. Guo, T. Chen, Y. W. Chen, et al. Solid-state electronics. Vol. 52 (2008), p.877.

Google Scholar

[4] S. Goseami, M. K. Mitra, K. K. Chattopadhyay. Synthetic metals. Vol. 159 (2009), p.2430.

Google Scholar

[5] S. Darbari, Y. Abdi, S. Mohajerzadeh, et al. Carbon. Vol. 48 (2010), p.2493.

Google Scholar

[6] Yukui Li, Cong Li. Key engineering materials. Vol. 428-429 (2010), p.436.

Google Scholar

[7] Fan-guang Zeng, Chang-chun Zhu, Weihua Liu, et al. Microelectronics journal. Vol. 37(2006), p.495.

Google Scholar

[8] Hoon-Sik Jang, Sang koo jeon, Seung Hoon Nahm. Carbon. Vol. 48 (2010), p.4019.

DOI: 10.1109/nano.2010.5697938

Google Scholar

[9] Yukui Li, Changchun Zhu, Xinghui Liu. Diamond and related materials. Vol. 11(2002), p.1845.

Google Scholar