Effect of Melting Process on Zr Content and Grain Refinement in ZE41A Alloy

Hong Hui Liu; Zhi Liang Ning; Fu Yang Cao; Yu Chen Zhang; Jian Fei Sun

doi:10.4028/www.scientific.net/AMR.284-286.1651

Paper Titles

Enhanced Tensile Ductility of AZ80 Magnesium Alloy
p.1635

Experimental Study of Squeeze Casting of ZK60 Magnesium Alloy
p.1639

Materials with Thermo-Diffusive Hardening
p.1643

Influences of Complex Modification of RE and P on the Wear Resistance of Hypereutectic Al-24Si Alloy
p.1647

Effect of Melting Process on Zr Content and Grain Refinement in ZE41A Alloy
p.1651

Spark Plasma Sintering of Al6061 and Al2124 Alloys
p.1656

Effect of Quenching on the Corrosion Morphology of Al-Zn-Sn-Ga Anode Alloy
p.1661

Study on Regeneration Ability of Oxidation Film on Ignition-Proof Magnesium Alloy Added with RE
p.1665

Influence of the Strain Rates on Tensile Properties and Fracture Interfaces for Mg-Al Alloys Containing Y
p.1671

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 284-286Effect of Melting Process on Zr Content and Grain...

Effect of Melting Process on Zr Content and Grain Refinement in ZE41A Alloy

Abstract:

The effects of melting process on Zr content and grain size in ZE41A alloy were investigated in this study. The results show that the soluble Zr increases with the increased addition content of Mg-Zr master, up to 0.87%. The ratio of Zr addition content to soluble Zr content changes within 3.86-4.8. The melt temperature has little effect on soluble Zr content. Grain size grows and both soluble Zr and total Zr decrease with the prolonged isothermal holding of the melt.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Advanced Materials Research (Volumes 284-286)

Pages:

1651-1655

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.284-286.1651

Citation:

Cite this paper

Online since:

July 2011

Authors:

Hong Hui Liu, Zhi Liang Ning, Fu Yang Cao, Yu Chen Zhang, Jian Fei Sun

Keywords:

Grain Size, Soluble Zr, Ze41a Alloy, Zr Addition

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] E.F. Emley, Principles of Magnesium Technology, Pergamon Press. Oxfordm United Kingdom, (1966), p.126

Google Scholar

[2] David StJohn, Ma. Qian, mark A.Easton et al. Metal Mater Trans A. Vol.36A(2005),p.669

Google Scholar

[3] Saunders WP, Strieter FP. Trans Am Found Soc. Vol.60(1952),p.581

Google Scholar

[4] Qian Ma, StJohn DH, Frost MT. Scripta Mater. Vol.50(2004),p.1115

Google Scholar

[5] Housh S, Mikucki B, Stevension A. Metal handbook, Vol.2. Ohio, AMS International. (1990), p.455

Google Scholar

[6] Ning Zhiliang, Cao Fuyang, Liu Honghui, Sun Jianfei, Du Jianfeng. Rare Metal Mater & Engi. Vol.38(2009),(1997)

Google Scholar

[7] Ma Qian, D.H.StJohn and M.T. Frost. Mater. Sci. Forum. Vols.419-422(2003),P.593

Google Scholar

[8] Honghui Liu, Zhingliang Ning, Fuyang Cao, ZhiJun Meng, Jianfei Sun. Advanced Materials Research, In press

Google Scholar

[9] Nayebb-hashemei, A.A. and Clark, J.B. The Mg-Zr System. Bulletin of Alloy Phase Diagram 6(1985),P.246

Google Scholar

[10] Ma Qian, L.Zheng, D.Graham, M.T. Frost, D.H. StJohn. J.Light Metals 1(2001),P.157

Google Scholar

[11] Meng Zhijun. Formation mechanism of zirconium-rich core in Mg-Zr alloys. Dissertation for the Degree of Master in Engineering, Harbin Institute of Technology.

Google Scholar