A Blend Control Scheme of Active Power Filter Based on Harmonic Voltage

Article Preview

Abstract:

This paper proposes a blend control scheme of APF based on harmonic voltage to solve the problem that load current detection APF cannot change the harmonic impedance in distribution system. In addition, based on the relationship between the rated volt-ampere of APF and the load volt-ampere, the conductance value could automatic adjustment. Computer simulation and laboratory system are designed and constructed to verify the validity and effectiveness of the shunt active filter equipped with the blend control. The shunt active filter with blend control not only can compensate the nonlinear load harmonic current but also can help to damp the harmonic voltage in distribution system.

You might also be interested in these eBooks

Info:

Periodical:

Advanced Materials Research (Volumes 268-270)

Pages:

434-439

Citation:

Online since:

July 2011

Export:

Price:

[1] Hirofumi Akagi, Hideaki Fujita, Keiji Wada.: A Shunt Active Filter Based on Voltage Detection for Harmonic Termination of a Radial Power Distribution Line, IEEE Trans. Ind. Appl, 1999, 35, (3), p.638–644.

DOI: 10.1109/28.767015

Google Scholar

[2] Grady, W. M, Samotyj, M. J and Noyola A. H: Survey of active power line conditioning schemeologies, IEEE Trans. Power Deli, 2009, 5, (3), pp.1536-1542.

DOI: 10.1109/61.57998

Google Scholar

[3] Akagi, H.: New trends in active power line conditioning, IEEE Trans. Ind. Appl, 2009, 32, (6), p.1312–1322.

Google Scholar

[4] Peng, F.Z.: Application experience with active power filters, IEEE Ind. Appl. Mag., 2008, 4, (5), p.21–30.

Google Scholar

[5] Green, T.C., and Marks, J.H.: Control techniques for active power filters, IEE Proc. Elect. Power Appl., 2005, 152, (2), p.369–381.

DOI: 10.1049/ip-epa:20040759

Google Scholar