Paper Titles

In Situ Test Study on Shear Strength Properties of Weathered Silty Mudstone
p.10

On the Tensile Experiments of the Woven Membrane Materials under Bi-Axial Loads
p.14

Behaviors of Carbon in Different Concentration of Sulfuric Acid
p.18

Fabrication of Thermo-Conductivity Film Using Anodic Aluminum Oxide Template and Silver Nanowires
p.22

Microstructure Evolution of a Metastable CrMnN Austenitic Stainless Steel during Compression Deformation
p.26

Study on the Formability of Different Gauge Tailor Welded Blanks Based on Tensile Test
p.34

Modified PP Fibers Reinforced Cement Mortar
p.38

Ex-Situ Study of Polymeric Syntactic Foams Mechanical Response Under Compression Loading: Effects of Foam Microstructure Using Microtomography Techniques
p.42

New Method for Measuring the Viscosity of the Molten Amorphous Alloy
p.63

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 146-147Microstructure Evolution of a Metastable CrMnN...

Microstructure Evolution of a Metastable CrMnN Austenitic Stainless Steel during Compression Deformation

Article Preview

Abstract:

Microstructural evolution of a metastable 18Cr12Mn0.55N austenitic stainless steel during compression deformation was investigated by transmission electron microscopy (TEM) and X-ray diffraction (XRD). TEM observation showed the occurrence of deformation-induced phase transformation and atypical deformation twin, the deformation-induced phase cannot be identified as austenite or martensite. XRD test showed that the amount of deformation-induced phase is less than the detectable limit of XRD.

You might also be interested in these eBooks

Advances in Superalloys

Info:

Periodical:

Advanced Materials Research (Volumes 146-147)

Pages:

26-33

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.146-147.26

Citation:

Cite this paper

Online since:

October 2010

Authors:

Ming Zhou Xu, Jian Jun Wang, Li Jun Wang, Wen Fang Cui, Chun Ming Liu

Keywords:

Compression, Deformation Induced Phase, High Nitrogen Austenitic Stainless Steel, Microstructure, Twin

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

[1] J.W. Simmons: Mater. Sci. Eng. A Vol. 207 (1996), p.159.

[2] G. Saller and H. Aigner: Mater. Manuf. Processes Vol. 19 (2004), p.41.

[3] Y.H. Kim, K.Y. Kim and Y.D. Lee: Mater. Manuf. Processes Vol. 19 (2004), p.51.

[4] G. Stein and I. Hucklenbroich: Mater. Manuf. Processes Vol. 19 (2004), p.7.

[5] T.H. Lee, C.S. Oh, S.J. Kim and S. Takaki: Acta Mater. Vol. 55 (2007), p.3649.

[6] I. Karaman, H. Sehitoglu, H.J. Maier and Y.I. Chumlyakov: Acta Mate. Vol. 49 (2001), p.3919.

[7] I. Karaman, H. Sehitoglu, Y.I. Chumlyakov and H.J. Maier: JOM Vol. 54 (2002) p.31.

[8] G. Saller, K.S. Hahn, C. Scheu and H. Clemens: Mater. Sci. Eng. A Vol. 427 (2006), p.246.

[9] T.H. Lee, C.S. Oh and S.J. Kim: Scripta Mater. Vol. 58 (2008) p.110.

[10] S. Frechard, A. Redjaïmia, E. Lach and A. Lichtenberger: Mater. Sci. Eng. A Vol. 480 (2007) p.89.

[11] P. Müllner, C. Solenthaler, P. Uggowitzer and M. O. Speidel: Mater. Sci. Eng. A Vol. 164 (1993) p.164.

[12] V.G. Gavriljuk and H. Berns: High nitrogen steels, 1st ed. (Spriger, Berlin, 1999).

[13] V. Gerold and H.P. karnthaler: Acta metal. Vol. 37 (1989), p.2177.

[14] B. Raj and M.U. Kamachi: High Nitrogen Steels and Stainless Steels (Narosa Publishing House, New Delhi, 2004).

[15] Xiaoying Huang: Transmission Electron Microscopy (ShangHai Science and Technology Press, Shanghai, 1987) (In Chinese).

[16] Qingchang Meng: Transmission Electron Microscopy (Harbin Institute of Technology Press, Harbin, 1998) (In Chinese).