Technology of Vehicle Detail Parts Monitoring Based on CGI and IPv6

Zhi Peng Song

doi:10.4028/www.scientific.net/AMM.494-495.210

Paper Titles

Research on the Evaluation of China’s Automotive Industry Security: Based on Gray Model
p.192

Study on the Dynamic Characteristics of Hot-Film Flow Sensor Based on the Sampling Air Channel
p.197

1-D Simulation of a Diesel Engines Injection Timing
p.201

Design and Implement of the Car Reversing Automatic Anti-Collision Control System
p.206

Technology of Vehicle Detail Parts Monitoring Based on CGI and IPv6
p.210

Analysis of Influence Factors on Braking Energy Recovery of Pure Electric Vehicle
p.214

Optimal Torque Distribution Strategy of Hybrid Electric Bus Based on Genetic Algorithms
p.219

Design of Control System of Eddy Current Retarder Based on BP Neural Network PID Controller
p.223

Dynamic Modeling and Simulation on a Hybrid Power System for Dual-Motor-Drive Electric Tracked Bulldozer
p.229

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 494-495Technology of Vehicle Detail Parts Monitoring...

Technology of Vehicle Detail Parts Monitoring Based on CGI and IPv6

Abstract:

For the problem of the vehicle parts monitoring in the internet of vehicle, the service technology is proposed to access the detail components through the common gateway interface technology. The information transmission is managed using the common gateway interface and interface parts for docking, and the monitoring of detail parts is made by the bus integration monitoring. IPv6 virtual network address information transmission is used to avoid the hidden dangers of IPv4 address depletion, and the virtual and independent IPv6 address is transferred with the part number in the common gateway interface to achieve a wide geographical access. In order to achieve real-time information exchange and robustness, the real-time transport protocol and real-time transport control protocol is used to assure smaller transmission delay and less packet loss rate. The test results show that the average response time is no more than 85 nanoseconds and the accuracy of information transfer is not less than 98.2%, and the results meets the needs of the most environmental, and the program is viable in practice.

You might also be interested in these eBooks

Current Development of Mechanical Engineering and Energy

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 494-495)

Pages:

210-213

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.494-495.210

Citation:

Cite this paper

Online since:

February 2014

Authors:

Zhi Peng Song*

Keywords:

Common Gateway Interface, Detailed Components Monitoring, Internet of Vehicle, Virtual IPv6 Address

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] Wang An, Jiao Meipeng, Zhang Xiaodong. Investigation of Spectrum Correction Algorithm for Detection of Domestic 18 kinds of Information Frequency-shift Signal[J]. Computer Simulation, 2012. 2. 11-12.

Google Scholar

[2] HU Guangbo, LIANG Hong, XU Qian. Research on Chaotic Feature Extraction of Ship Radiated Noise[J]. Computer Simulation, 2011, 28(2): 22-24.

Google Scholar

[3] ZHANG Ren-shang. Network Intrusion Detection System Based on Expert System and Neural Network[J]. Computer Simulation. 2012; 29(9): 162-165.

Google Scholar

[4] Zhu Hong. Fault Diagnosis for Analog Circuits Based on D-S Evidence Theory and PSO Neural Network[J]. Computer Measurement & Control. 2013; 21(4): 868-870.

Google Scholar

[5] GUO Qiu-xia, DENG Xiang-ming, OU Yang-jiang. Evaluation of Value Chain Risks Based on BP Artificial Neural Network[J]. Logistics Technology. 2011; 30(7): 120-122.

Google Scholar