[1]
Y. Nonaka, A double coil method for simultaneously measuring the resistivity, permeability and thickness of a moving metal sheet, IEEE Transactions on Instrumentation and Measurement, vol. 45, pp.478-482, (1996).
DOI: 10.1109/19.492771
Google Scholar
[2]
A. Sethuraman and J. H. Rose, Rapid inversion of eddy current data for conductivity and thickness of metal coatings, Journal of Nondestructive Evaluation, vol. 14, pp.39-46, (1995).
DOI: 10.1007/bf00735670
Google Scholar
[3]
D. J. Harrison, L. D. Jones, and S. K. Burke, Benchmark problems for defect size and shape determination in eddy-current nondestructive evaluation, Journal of Nondestructive Evaluation, vol. 15, pp.21-34, (1996).
DOI: 10.1007/bf00733823
Google Scholar
[4]
J. C. Moulder, E. Uzal, and J. H. Rose, Thickness and conductivity of metallic layers from eddy current measurements, Review of Scientific Instruments, vol. 63, pp.3455-3465, (1992).
DOI: 10.1063/1.1143749
Google Scholar
[5]
W. Yin, S. J. Dickinson and A. J. Peyton, A multi-frequency impedance analyzing instrument for eddy current testing, Measurement Science and Technology, vol. 17, pp.393-402, (2006).
DOI: 10.1088/0957-0233/17/2/022
Google Scholar
[6]
Andrea Bernieri and Giovanni Betta, Characterization of an Eddy-Current-Based System for Nondestructive Testing, IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, VOL51(2), pp.241-245, (2002).
DOI: 10.1109/19.997819
Google Scholar
[7]
P. R. Underhill and T.W. Krause, Enhancing Probability of Detection and Analysis of Bolt Hole Eddy Current, J Nondestruct Eval, 30, pp.237-245, (2011).
DOI: 10.1007/s10921-011-0112-x
Google Scholar
[8]
Bernd HEUTLING, Ulrich VON BEHR and Ulrich RÖS, Mechanized Crack Detection on Austenitic Weld Seams with Eddy Current Technology, ECNDT 2006 - Tu. 3. 6. 3.
Google Scholar
[9]
W Yin and A. J. Peyton, A planar EMT system for the detection of faults on thin metallic plates, Measurement Science and Technology, vol. 17, pp.2130-2135, (2006).
DOI: 10.1088/0957-0233/17/8/011
Google Scholar