Study on Microstructure and Formability of DP Steel of Lightweight Automobile

Jin Wu

doi:10.4028/www.scientific.net/AMM.321-324.184

Paper Titles

Effect of Pre-Polymerization Conditions on the Performance of UF/Low Melting Point Paraffin Microcapsules
p.163

Thickness Calculation of Roof Sloping Layer
p.168

Rolling-Friction Behavior of Sub-Micron Polystyrene-Sphere Arrays under Very Light Loads
p.174

The Calculation and Adjusting of Die-Casting Parameters of Car Pump Cover
p.179

Study on Microstructure and Formability of DP Steel of Lightweight Automobile
p.184

Finite Element Analysis of Axis Deviation between Rivet and Plate Hole
p.188

The Role of Tourmaline Particles in the Moving Bed Bioreator for Coking Wastewater Treatment
p.192

Numerical Simulation of Rough Surface with Crossed Texture
p.196

The Logistics Characteristics Analysis on Flexible Conveying Device of Mini-Type Sugarcane Harvester
p.201

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vols. 321-324Study on Microstructure and Formability of DP...

Study on Microstructure and Formability of DP Steel of Lightweight Automobile

Abstract:

Dual phase (DP) steel is a high strength steel for auto-panel. In this paper, mechanical property, forming ability of high strength steel DP450 are studied by experiments and compared with those of steel MS6000. And theoretical research on predicting the forming limit of steel DP450 by the NADDRG model. The established mathematic model for relativity is of practical usefulness. Experimental results reveal that the yield strength of steel DP450 is about 7.2% lower than the MS6000, and the break strength increases by 18.9%, while the elongation increases by 19%. The results show that mechanical property of high strength steel DP450 is better than that of MS6000, while forming ability of DP450 is not lower than that of MS6000.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volumes 321-324)

Pages:

184-187

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.321-324.184

Citation:

Cite this paper

Online since:

June 2013

Authors:

Jin Wu

Keywords:

Automobile, Dual Phase Steel, Formability, High Strength, Low Alloy Steel, Ultralight

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] Kang Yonglin, Quality Control and Formability of Modern Automobile Plate [M], Beijing: Metallurgical Industry Press, 1999.

Google Scholar

[2] WANG Xian-jin, CUI De-li, TANG Di, WANG Zuo-cheng. Effects of annealing condition on recrystallization texture and deep drawing properties of interstitial-free steel[J]. Steel, 1992, 27, (6): 48~52.

Google Scholar

[3] Fang X F, Dahl W. Influence of the Microstructure on Strain Hardening of Steels.Materials Research and Advanced Techniques. 1995. 86(1): 41~48

Google Scholar

[4] Gusek C.O., Bleck W., Dahl W. Modeling of Sheet Metal Testing.Int.Conf.MSMM96. Beijng. 1996.

Google Scholar

[5] CHEN Xin-ping, JIANG Hao-min. The prediction and validation of bulging region of forming limit diagram(FLD) of steel sheet[J]. Metal Forming Technology, 2003, 7.

Google Scholar

[6] CHEN Xin-ping, WANG Xue-pu.Approach for predicting the limit draw strain of the forming diagram. Metal Forming Technology, 2000, 4.

Google Scholar