[1]
R.E. Gliner, V.N Dubinskii., E.B. Katyukhin, V.A. Pryanichnikov, Estimation of mechanical deformability of metals based on energy dissipation, Izvestiya. Ferrous Metallurgy. 60(9) (2017) 739-744.
DOI: 10.17073/0368-0797-2017-9-739-744
Google Scholar
[2]
G.V. Pachurin, S.M. Shevchenko, M.V. Mukhina, Rolled metal structure resource saving preparation for long-length hardened bolt upsetting, Solid State Phenomena. 284 (2018) 662-666.
DOI: 10.4028/www.scientific.net/ssp.284.662
Google Scholar
[3]
A.S. Anishchenko, Drawing of titanium wires under isothermal conditions, Vopr. Materialoved. 2 (1995) 45-53.
Google Scholar
[4]
B.B. Chechulin, S.S. Ushkov, and I.N. Razuvaev, Titanium Alloys in Mechanical Engineering, Mashinostroenie, Leningrad, (1977).
Google Scholar
[5]
L.V. Radionova, A.A. Radionov, Current state and prospects of the development of drawing production of steel wires, Mashinostroen. Setev. Élektr. Nauch. Zh. 1 (2013) 3-11.
Google Scholar
[6]
A.V. Kop'Ev, Resource-saving technological processes of rolling of wires in a continuous mill with four-roll passes, Candidate-Degree Thesis (Engineering), Magnitogorsk, (2001).
Google Scholar
[7]
L.V. Radionova, V.V. Shirokov, S.R. Faizov, M.A. Zhludov, Studies of influence of process parameters on the strain rate at high-speed wire drawing, MSF. 946 (2019) 832-838.
DOI: 10.4028/www.scientific.net/msf.946.832
Google Scholar
[8]
V.A. Kharitonov, V.I. Zyuzin, L.V. Radionova, L.D. Rol'shchikov, New technological lubricants for steel wire drawing, Stal'. 12 (2001) 49-50.
Google Scholar
[9]
V.S. Slavin, Roller Dies of the Housingless Type: A Monograph, Magnitogorsk State University, Magnitogorsk, (2010).
Google Scholar
[10]
L.V. Radionova, M.N. Samodurova, A.E. Sarafanov, et al., Elevation of the wear resistance of roller dies for the production of wires from titanium alloys, Metallurgist. 64 (2021) 1188-1197.
DOI: 10.1007/s11015-021-01104-1
Google Scholar
[11]
A.V. Vydrin, B.V. Barichko, V.S. Barichko, Development of the rational conditions of deformation of metals in roller dies with the use of the methods of modeling, in: Proc. of the 6Th Congr. of Rolling Experts, Chermetinformatsiya, LLC, Moscow, 2005, pp.475-480.
Google Scholar
[12]
A.A. Shter, Y.N. Popov, B.V. Barichko, Production of wires and shapes from titanium-based alloys in roller dies, in: Treatment of Solid and Layered Materials: Interuniversity Collection of Scientific Works, 1999, pp.88-92.
Google Scholar
[13]
V.G. Dukmasov, A.V. Vydrin, B.V. Barichko, Mathematical Model of Forming in the Deformation Zone During Flatting in Roller Die. Hardware Production in the XXI Century, Magnitogorsk, MGTU Publ., 2001, pp.54-59.
Google Scholar
[14]
L.V. Radionova, M.N. Samodurova, B.A. Chaplygin, Improving the performance characteristics of the drawing machine intermediate block working surface by additive technologies, IOP Conference Series: Materials Science and Engineering. 969 (2020) 012108.
DOI: 10.1088/1757-899x/969/1/012108
Google Scholar
[15]
L.V. Radionova, S.R. Faizov, R.A. Lisovskiy, T.A. Lisovskaya, Automated laboratory drawing mill, Russian Internet Journal of Industrial Engineering. 5(2) (2017) 68-73.
Google Scholar
