Growth of Single Crystal 3C-SiC(111) on a Poly-Si Seed Layer

Abstract:

A novel method for growing highly-crystalline 3C-SiC on an oxide release layer via a poly-Si seed layer is reported. Silicon carbide’s potential role as a ubiquitous material for MEMS fabrication lies in its dual role as an electronic and mechanical material. Unfortunately, due to residual stresses and crystal defects stemming from the large lattice constant mismatch and the thermal expansion coefficient difference between SiC and Si, the use of SiC in Si-based MEMS fabrication techniques has been very limited. The growth of 3C-SiC on a poly-Si seed layer deposited on oxide on (111)Si substrates (i.e., p-Si/ SiO2/(111)Si) provides an alternative fabrication method to expensive, traditional SOI bonding techniques for producing free-standing 3C-SiC MEMS structures. 3C-SiC grown with a poly-Si seed layer on SiO2 should experience reduced residual stress and far fewer defects due to the compliance of the SiO2 layer. Although poly-Si is utilized as a seed layer in this process, a well-ordered monocrystalline 3C-SiC layer was achieved and the process and film properties reported.