Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Time Dependence of γ/γ' Lattice Mismatch in Creep-Deformed Single Crystal Superalloy SC16 at 1173 K
p.3059
The Validation of Microstructural Prediction in Nickel Superalloys
p.3064
The Combination of Modeling Techniques to Predict the Service Behaviour of Heat Resistant Alloys
p.3070
Development of New Alloys with Excellent High Temperature Creep Characteristics of 700°C or More
p.3076
Optimization of Weld Conditions and Alloy Composition for Welding of Single-Crystal Nickel-Based Superalloys
p.3082
Drawbacks to the Application of Long-Term Degradation Tests, with Reference to Metal Dusting of Nickel-Base Alloys at High Temperatures
p.3088
Recrystallization and Grain Growth during Alloy 718 Processing
p.3094
Stress Exponent of Minimum Creep Rate of Single Crystal Nickel-Based Superalloy, CMSX-4, AT 1273K
p.3100
Recent Activities on Directional Solidification at the State Key Laboratory of Solidification Processing
p.3106

Optimization of Weld Conditions and Alloy Composition for Welding of Single-Crystal Nickel-Based Superalloys

Article Preview

Abstract:

You might also be interested in these eBooks
THERMEC 2006 View Preview

Info:

Periodical:

Materials Science Forum (Volumes 539-543)

Pages:

3082-3087

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.539-543.3082

Citation:

Cite this paper

Online since:

March 2007

Authors:

J.M. Vitek, S.A. David, Suresh S. Babu

Keywords:

Modeling, Nickel-Based Superalloy, Single Crystal, Stray Grains, Welding

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] D. Rosenthal: Weld J Vol. 20(5) (1941), p.220-s.

Google Scholar

[2] N. Saunders, X. Li, P. Miodownik and J. Ph. Schillé: Proc. Symp. Materials Design Approaches and Experiences, eds. J-C. Shao et al, (TMS, Warrendale, PA, U.S.A. 2001), p.185.

Google Scholar

[3] N. Saunders, M. Fahrmann and C. J. Small: Superalloys 2000, eds, K. A. Green, T. M. Pollock and R. D. Kissinger, (TMS, Warrendale, PA, U.S.A. 2000), p.803.

Google Scholar

[4] J. M. Vitek: Acta Mater Vol. 53 (2005), p.53.

Google Scholar

[5] W. F. Savage, C. D. Lundin, and A. H. Aronson: Weld J Vol. 44 (1965), p.175-s.

Google Scholar

[6] W. F. Savage, C. D. Lundin, and T. F. Chase: Weld J Vol. 47 (1968), p.522-s.

Google Scholar

[7] M. C. Flemings: Solidification Processing (McGraw-Hill, New York, NY, U.S.A.1974).

Google Scholar

[8] W. Kurz and D. J. Fisher: Fundamentals of Solidification (Trans Tech Publications Ltd., Aedermannsdorf, Switzerland 1984).

Google Scholar

[9] M. Rappaz and E. J. Blank: J Cryst Growth Vol 74 (1986), p.67.

Google Scholar

[10] M. Rappaz, S. A. David, J. M. Vitek, and L. A. Boatner: Metall. Trans. A Vol. 20A (1989), p.1125.

Google Scholar

[11] S. A. David, J. M. Vitek, M. Rappaz, and L. A. Boatner: Metall. Trans. A Vol. 21A (1990), p.1753.

Google Scholar

[12] M. Rappaz, S. A. David, J. M. Vitek, and L. A. Boatner: Metall. Trans. A Vol. 21A (1990), p.1767.

Google Scholar

[13] M. Gäumann, C. Bezençon, P. Canalis, and W. Kurz: Acta Mater Vol. 49 (2001), p.1051.

Google Scholar

[14] J. M. Vitek, S. S. Babu, J-W. Park, and S. A. David: Superalloys 2004, eds. K. A. Green, T. M. Pollock, H. Harada, T. E. Howson, R. C. Reed, J. J. Schirra, and S. Walston, (TMS, Warrendale, PA, U. S. A. 2004), p.459.

Google Scholar

[15] J. M. Vitek, S. S. Babu, S. A. David, and J-W. Park: Mater Sci Forum Vol. 426-432 (2003), p.4123.

Google Scholar

[16] J. M. Vitek, S. S. Babu, S. A. David, J-W. Park, Y. Hu and W. Hehmann: to be published in Trends in Welding Research, (ASM-International, Materials Park, OH, U. S. A. 2006).

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved