[1]
T.L. Brown, S. Swaminathan, B.C. Rao, R.F. Kezar, S. Chandrasekar, W.D. Compton, K.P. Trumble, A.H. King, Machining as a Method for Studying Effects of Very Large Strain Deformation, Ultrafine Grained Materials III, The Minerals, Metals and Materials Society, (2004).
DOI: 10.1016/j.msea.2005.08.139
Google Scholar
[2]
T.L. Brown, S. Swaminathan, S. Chandrasekar, W.D. Compton, A.H. King, K.P. Trumble, Low-Cost Manufacturing Process for Nanostructured Metals and Alloys, J. Mater. Res., vol. 17(10), pp.2484-2488, (2002).
DOI: 10.1557/jmr.2002.0362
Google Scholar
[3]
S. Lee, J. Hwang, M.R. Shankar, S. Chandrasekar, W.D. Compton, Velocity and Strain Distrbutions in Two-Dimensional Machining, Proceedings of IMECE04, (2004).
Google Scholar
[4]
M.C. Shaw, Metal Cutting Principles, Oxford Series in Advanced Manufacturing, Claredon, Oxford, (1984).
Google Scholar
[5]
P.L.B. Oxley, The Mechanics of Machining: An Analytical Approach to Assessing Machinability, John Wiley & Sons, New York, (1989).
Google Scholar
[6]
S. Kobayashi, E.G. Thomsen, Some Observations on the Shearing Process in Metal Cutting, J. Engr. for Industry, vol. 81, pp.251-262, (1960).
DOI: 10.1115/1.4008316
Google Scholar
[7]
S. Swaminathan, M.R. Shankar, S. Lee, J. Hwang, A.H. King, R.F. Kezar, B.C. Rao, T.L. Brown, S. Chandrasekar, W.D. Compton, K.P. Trumble, Large Strani Deformation and Ultra-Fine Grained Materials by Machining, to appear in Materials Science and Engineering A, (2005).
DOI: 10.1016/j.msea.2005.08.139
Google Scholar
[8]
A.J.M. Shih, S. Chandrasekar, H.T.Y. Yang, Finite Element Simulation of Metal Cutting Process with Strain-Rate and Temerature Effects, Proc. ASME Symposium on Fundamental Issues in Machining, ASME, New York, pp.11-24, (1990).
Google Scholar
[9]
T.D. Marusich and M. Ortiz, Modelling and Simulation of High-Speed Machining, Int. J. Num. Meth. Engr., vol. 38, pp.3675-3694, (1995).
DOI: 10.1002/nme.1620382108
Google Scholar
[10]
J.S. Strenkowski, J.T. Carroll III, A Finite Element Model of Orthogonal Metal Cutting, J. Engr. Industry, vol. 107, pp.349-354, (1985).
DOI: 10.1115/1.3186008
Google Scholar
[11]
V. Madhavan, S. Chandrasekar, T.N. Farris, Machining as a Wedge Indentation, J. Appl. Mech., vol. 67, pp.128-139, (2000).
DOI: 10.1115/1.321157
Google Scholar
[12]
B.E. Klamecki, Incipient Chip Formation in Metal Cutting-A Three Dimension Finite Element Analysis, Ph.D. thesis, University of Illinois at Urbana-Champaign, Urbana, IL., (1973).
Google Scholar
[13]
E. Usui, T. Shirakashi, Mechanics of Machining-From Description to Predictive Theory, On the Art of Cutting Metals-75 Years Later, ASME, New York, pp.13-35, (1982).
Google Scholar
[14]
G.S. Sekhon, J.L. Chenot, Numerical Simulation of Continuous Chip Formation During Non-Steady Orthogonal Cutting, Engr. Comput., vol. 10, pp.31-48, (1993).
DOI: 10.1108/eb023893
Google Scholar
[15]
H.E. Enahoro, P.L.B. Oxley, Flow Along Tool-Chip Interface in Orthogonal Metal Cutting, J. Mech. Engr. Science, vol. 8, pp.36-41, (1966).
DOI: 10.1243/jmes_jour_1966_008_007_02
Google Scholar
[16]
Cambridge Material Selector, Granta Materials Intelligence, (2005).
Google Scholar