Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Study on the Micro Mechanism of Recrystallization Texture Formation in Cold-Rolled IF Steel Sheet
p.417
Texture, Microstructure and Second-Phase Particles in a Ti+P Interstitial Free (IF) Steel
p.423
Rolling and Recrystallization Textures in Asymmetrically Rolled Silicon Steel Thin Strip
p.429
Effect of Magnetic Annealing on Recrystallization Texture in Silicon Steel Thin Strip
p.435
Texture Changes of Carbon Steel and Stainless Steel as a Result of Wear
p.441
Orientation Relationship during Partial α-γ-Phase Transformation in Microalloyed Steels
p.447
Grain Boundary Nature and Localized Corrosion in 304 Austenitic Stainless Steel
p.453
Microscale Characterisation of Deformed Microstructures of TRIP-Assisted and Multiphase Steels
p.459
Characteristics of Recrystallization Texture Evolution in High Magnetic Field for Interstitial Free (IF) Steel Sheet
p.465

Texture Changes of Carbon Steel and Stainless Steel as a Result of Wear

Article Preview

Abstract:

In this research, surface texture changes of carbon steel AISI 1045 and stainless steel AISI 304 under simultaneous wear and corrosion were investigated. A solution of 3.5 % wt. NaCl was used as the corrosion agent and a pin-on-disk tribometer was employed to perform wear and corrosion wear tests.Texture investigations of the worn samples have shown texture changes after wear and corrosion-wear tests. In worn carbon steel samples after dry wear test, {011}<100> and {111} fiber texture components were developed in initially random oriented samples, whereas under corrosive-wear conditions, {111}<011> texture and {001}<110> texture were developed. In the stainless steel samples, {112}<110> texture component was observed under both dry and corrosive wear conditions, in the samples that had random grain orientations before corrosion and corrosion-wear tests.

You might also be interested in these eBooks
Textures of Materials - ICOTOM 14 View Preview

Info:

Periodical:

Materials Science Forum (Volumes 495-497)

Pages:

441-446

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.495-497.441

Citation:

Cite this paper

Online since:

September 2005

Authors:

M. Reza Bateni, Jerzy A. Szpunar, X. Wang, Dong Yang Li

Keywords:

Corrosion Wear, Friction, Texture, Wear

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] H. Krause and A.H. Demirci: Wear Vol. 61 (1980), pp.325-332.

Google Scholar

[2] P. Heilmann, W.A.T. Clark, and D.A. Rigney: Acta Metall. Vol. 31 (1983), pp.1293-1305.

Google Scholar

[3] A. Ravikiran: Tribology Transactions Vol. 43 (2000), pp.287-292.

Google Scholar

[4] M. Godec, M. Jenko: Materials and Manufacturing Technology Vol. 34 (2000), pp.359-364.

Google Scholar

[5] Hans-J. Bunge: Steel Research Vol. 62 (1991), pp.530-541.

Google Scholar

[6] Zoheir N. Farhat: Wear Vol. 250 (2001), pp.401-408.

Google Scholar

[7] D.R. Wheeler and D.H. Buckley: Wear Vol. 33 (1975), pp.65-74.

Google Scholar

[8] P.J. Alison and H. Wilman: British journal Applied Physics Vol. 15 (1964), pp.281-289.

Google Scholar

[9] H. Krause and E. Ocalan: Wear Vol. 108 (1986), pp.337-343.

Google Scholar

[10] G. Liu and B.J. Duggan: Metallurgical and Materials Transactions Vol. 32A (2001), pp.125-134.

Google Scholar

[11] S. Mishra, C. Därmann and K. Lücke: Acta metall. Vol. 32 (1984), p. 2l85-2201.

Google Scholar

[12] V.I. Yushkov, R. A. Adamescu, Y. S. Machnev, T. M. Gapeka and P. V. Geld: Materials Science and Engineering Vol. 64 (1984), pp.157-169.

DOI: 10.1016/0025-5416(84)90100-9

Google Scholar

[13] B. Ravi Kumar, A.K. Singh, Samar Das, D.K. Bhattacharya, Materials Science and Engineering A Vol. 364 (2004), pp.132-139.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved