Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Preparation of Camphene Carbon/Silicon Carbide Slurry for 3D Printing
p.159
Preparation of Ti2AlN Porous Ceramics by Organic Foam Impregnation Process
p.163
Fabrication and Properties of Porous Carbon Preforms for Making Reaction Formed SiC
p.169
Densification Behaviors in the Early Stage of Spark Plasma Sintering of 3Y-TZP Nanoceramics
p.173
Effect of Sintering Aids on the Properties of Porous YAG Ceramics
p.178
Effects of Particle Size on Densification Behavior of Si3N4 Ceramics
p.182
Effect of Sintering Pressure on Mechanical Properties of BN-Si3N4 Ceramic Composites Prepared by Spark Plasma Sintering
p.188
The Influence of Al2O3 and TiO2 Additions on the Sintering Behavior of Partial Reaction Bonding Silicon Nitride
p.193
Sintering of High Quality Titanium-Doped Zinc Oxide Ceramic Sputtering Target
p.198

Effect of Sintering Aids on the Properties of Porous YAG Ceramics

Article Preview

Abstract:

Yttrium aluminum garnet (YAG) with a chemical composition of Y3Al5O12 is an important advanced structural and functional material due to some excellent properties. The porous YAG ceramics were prepared via vacuum sintering technology, the effect of sintering aids on the properties of porous YAG ceramics were investigated in this paper. Through an analysis and discussion, the conclusions are that the porosity increases with the increasing sintering temperature from 1300°C to 1500°C, the pore is moved to the surface of sample, which forms the open pore to make the porosity increase, the more and bigger sintering neck is increased. Porous YAG ceramics are sintered at 1500°C, the regular outside shapes of porous YAG ceramic are kept using CaO and MgO as sintering aids, the outside shape of porous YAG ceramic is wrecked using Al2O3 as sintering aids, which shows the over fired phenomenon.

You might also be interested in these eBooks
High-Performance Ceramics IX View Preview

Info:

Periodical:

Key Engineering Materials (Volume 697)

Pages:

178-181

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.697.178

Citation:

Cite this paper

Online since:

July 2016

Authors:

Min Han Xu, Jie Guang Song*, Rui Hua Wang, Shi Bin Li, Ning Wang, Si Yuan Yu, Han Xing Yan, Ting Ting Xiao, Fei Chen

Keywords:

Porosity, Porous Ceramics, Sintering Aids, Sintering Temperature, YAG

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] S. Bagayev, A. Kaminski, Y. Kopylov, Optic Mater. 33 (2011) 702-705.

Google Scholar

[2] R. Marder, C. Estournes, G. Chevallier, J. Eur. Ceram. Soc. 35 (2015) 211-218.

Google Scholar

[3] Y.H. Sang, H. Liu, Y.H. Lu, J. Alloy. Compd. 490 (2010) 459-462.

Google Scholar

[4] Y.H. Huang, D.L. Jiang, J.X. Zhang, J. Rare Earth. 32 (2014) 416-422.

Google Scholar

[5] J.G. Song, F. Wang, M.H. Xu, J. Ceram. Proc. Res. 13 (2012) 154-157.

Google Scholar

[6] X.P. Qin, H. Yang, G.H. Zhou, Mater. Res. Bull. 46 (2011) 170-174.

Google Scholar

[7] Z. Song, J. Liao, Q.L. Liu, J. Crys. Growth. 365 (2013) 24-28.

Google Scholar

[8] R.M. Laine. Adv. Mater. 17 (2005) 830-833.

Google Scholar

[9] Y.M. Zhang, H.M. Yu, Ceram. Int. 35 (2009) 2077-(2081).

Google Scholar

[10] B.L. Liu, J. Li, R. Yavetskiy, M. Ivanov, J. Eur. Ceram. Soc. 35 (2015) 2379-2390.

Google Scholar

[11] G. He, G.H. Liu, Z.C. Yang, S.B. Guo, J.T. Li, Ceram. Int. 40 (2014) 15265-15271.

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved