Abstract
A gyrotron is used as a microwave power source in an electron-cyclotron-resonance (ECR) ion source system. In order to test the gyrotron, which operates at a frequency of 28 GHz in the continuous-wave (CW) mode, the Korea Basic Science Institute (KBSI) developed a water load that absorbed up to 10 kW of power. The water load consists of an aluminum jacket, a quartz window, and a waveguide. A distilled water flow of 13 L/min, sealed with the quartz window, is used as the absorbent. At 28 GHz, the S 11 parameter and the voltage standing-wave ratio (VSWR) of the water load design were calculated to be less than −30 dB and 1.05, respectively. In practical experiments, the increase in the water’s temperature was approximately 10 °C at the highest power.
Similar content being viewed by others
References
T. Nakagawa et al., Jpn. J. Appl. Phys. 35, L1124 (1996).
J.-H. Yoon, B.-S. Lee, S. Choi, J. Y. Park, J.-W. Ok and M.-S. Won, Rev. Sci. Instrum. 83, 02A315 (2012).
CST Studio Suite, CST Microwave Studio 2008, http://www.cst.com.
R. J. Giguere, T. L. Bray, S. M. Duncan and G. Majetich, Tetrahedron Lett. 27, 4945 (1986).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ok, JW., Choi, S., Lee, BS. et al. Development of a water load for a Ka-band 10 kW continuous-wave gyrotron in an ECR ion source system. Journal of the Korean Physical Society 66, 349–352 (2015). https://doi.org/10.3938/jkps.66.349
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3938/jkps.66.349