Abstract
High-resolution CRT displays are subject togeometric distortion: lines that are straight in the internal coordinates of the graphics software and hardware are curved when projected onto a plane in the observer’s line of sight. As the available resolution of CRT screens increases, it becomes more difficult to measure and correct for this distortion. We present a simple, highly accurate method for determining the mapping between internal coordinates and the viewing plane. It requires that an observer, using a calibration program, adjust triples of displayed points until they are collinear. A metal straightedge placed between the observer and the screen aids in this judgment. We describe the calibration of an IBM Enhanced Graphics Display in high-resolution mode (350 × 640 pixels), and illustrate how to use the estimated mapping to choose internal coordinates to draw undistorted figures that are accurate to within 0.5 pixel. The method can be used to assess or to correct the accuracy of visual displays. The method is relevant to experiments in spatial vision, spatial perception, perception of dot patterns, and any application in which geometrically accurate stimuli are required.
Article PDF
Similar content being viewed by others
References
Chandler, J. P (1965). STEPITQuantum Chemistry Program Ex-change. Bloomington: Indiana University, Department of Chemistry.
Rosenfeld, A., &Kak, A. C. (1976).Digital picture processing. New York: Academic Press.
Press, W. H., Flannery, B. P., Teulosky, S. A., &Vetterung, W. T. (1986).Numerical recipes: The art of scientific computing. Cambridge, England: Cambridge University Press.
Tannas, L. E., Jr. (Ed.). (1985).Flat-panel displays and CRTs. New York: Van Nostrand Reinhold.
Author information
Authors and Affiliations
Additional information
This research was supported in part through funds provided to the first author by the University of Michigan. We are especially grateful to Robert A Mayans of AT&T Bell Laboratories for providing proofs of the two propositions in the text
Rights and permissions
About this article
Cite this article
Maloney, L.T., Koh, K. A method for calibrating the spatial coordinates of a visual display to high accuracy. Behavior Research Methods, Instruments, & Computers 20, 372–389 (1988). https://doi.org/10.3758/BF03202682
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.3758/BF03202682