Experimental Investigation on Abrasive Waterjet Machining of Fibre Vinyl Ester Composite
DOI:
https://doi.org/10.37255/jme.v4i3pp134-138Keywords:
Abrasive Water Jet Machining, Carbon fibre vinyl ester composite, Process Parameters, Surface Roughness, Kerf TaperAbstract
Abrasive water jet machining (AWJM) is one of the most developed non-traditional machining processes. It is generally used to cut difficult to cut materials like composites. The present study is focused on machining of carbon fiber vinyl ester composite with AWJM. The effect of process parameters namely water pressure, standoff distance and traverse speed on surface roughness and kerf tapper is studied. Design of experiment is done by using Taguchi L16 orthogonal array. It is observed that water pressure is the most significant parameter followed by traverse speed. It is found that with the increase in water pressure and decrease in traverse speed of AWJM, surface roughness and kerf tapper of machined samples decreases.
Downloads
Metrics
References
Abdullah, R., Mahrous A, & Barakat A (2016), “Surface quality of marble machined by abrasive water jet”, Cogent Engineering, 3(1), 1178626.
Arora D and Ramulu M (1996), “The kerf characteristic of abrasive water jet machining on graphite/epoxy composite”, Journal of engineering materials and technology, 118, 256-265.
Khan A A, & Haque M M (2007), “Performance of different abrasive materials during abrasive water jet machining of glass”, Journal of materials processing technology, 191(1-3), 404-407.
Kumar P & Kant R (2019), “Experimental study of abrasive water jet machining of kevlar epoxy composite”, Journal of Manufacturing Engineering, 14(1), 026-032
Çaydaş U, & Hascalık A (2008), “A study on surface roughness in abrasive water jet machining process using artificial neural networks and regression analysis method”, Journal of materials processing technology, 202(1-3), 574-582.
Azmir M A, & Ahsan A K (2009), “A study of abrasive water jet machining process on glass/epoxy composite laminate”, Journal of Materials Processing Technology, 209(20), 6168-6173.
Karakurt Izzet, Aydin Gokhan and Aydiner Kerim (2011), “Analysis of kerf taper angle off the granite machined by abrasive water jet”, Indian journal of engineering and material sciences, 18, 435-442
Karakurt I, Aydin G, & Aydiner K (2014), “An investigation on the kerf width in abrasive waterjet cutting of granitic rocks”, Arabian Journal of Geosciences, 7(7), 2923-2932.
Dhanawade A, Kumar S and Kalmekar R V (2016), “Abrasive Water Jet Machining of Carbon Epoxy Composite”, Defense Science Journal, 66(5), 522.
Upadhyai, R P, Dhanawade A, Kumar S, & Kalmekar R (2017) “An experimental study of kerf properties of lead zirconate titanate ceramic machined by abrasive water jet”, Journal of Manufacturing Engineering, 12(1), 6-11
Dhanawade A, & Kumar S (2018), “Study on carbon epoxy composite surfaces machined by abrasive water jet machining”, Journal of Composite Materials, 0021998318807278
Vigneshwaran S, Uthayakumar M, & Arumugaprabu V (2018), “Abrasive water jet machining of fiber-reinforced composite materials”, Journal of Reinforced Plastics and Composites, 37(4), 230-237
Downloads
Published
How to Cite
Issue
Section
