11th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens

doi:10.3390/books978-3-0365-6347-3

Reprint

Download Flyer

11th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens

Edited by

January 2023

404 pages

ISBN978-3-0365-6346-6 (Hardback)
ISBN978-3-0365-6347-3 (PDF)

https://doi.org/10.3390/books978-3-0365-6347-3

Free download (PDF)

This book is a reprint of the Special Issue 11th EASN International Conference on Innovation in Aviation & Space to the Satisfaction of the European Citizens that was published in

Engineering

Summary

This Special Issue contains selected papers from works presented at the 11th EASN (European Aeronautics Science Network) International Conference on Innovation in Aviation & Space, which was held from the 1st until the 3rd of September 2021. About 420 remote participants contributed to a high-level scientific gathering providing some of the latest research results on the topic, as well as some of the latest relevant technological advancements. Nineteen interesting papers, which cover a wide range of topics including characterization, analysis and design, as well as numerical simulation, are contained in this Special Issue.

Format

Hardback

License

Keywords

thermoplastics; holistic assessment; PEEK/PEI; life cycle analysis; life cycle costing; aircraft insulation; leakage; moisture; ice; frost; wing design optimization; structural optimization; composite materials; computational fluid dynamics; multi-fidelity optimization; aircraft design; distributed propulsion; general aviation; regional aircraft; structural mass; wing design; aviation; MDAO; FAST-OAD; innovative aircraft architecture; multifunctional materials and structures; structural batteries; aerospace engineering; electric aircraft; composites; microturbine; turbojet; component maps; map scaling; off-design; transient simulation; aerial target; unmanned aerial vehicle; flight data; digital twin; plasma assisted ignition; flow structures; nanopulsed plasma; ignition delay time; low temperature; low pressure; air traffic; conflict detection; machine learning; ATC tool; fuel cell; gas turbine; hybrid propulsion; hydrogen fuel; aircraft design; heat exchange; water condensation; steam injection; efficiency assessment; NO_x reduction; conceptual design in aerospace; advanced morphological approach; fuzzy sets; de-icing; electro-thermal models; electrical conductivity; graphene nano-platelets; thermal emissivity; flight stabilization; flight control; flight trimming system; small airplane avionics; test bench; landing gear; electrical brake; force control; runway irregularities; engine health monitoring; diagnostics; artificial neural network; principal component analysis; artificial intelligence; additive manufacturing; fused filament fabrication (FFF); PETG; composites; compressive properties; creep and stress relaxation behaviour; mechanical testing; automated piping; design languages; model-based systems engineering; hybrid-electric aircraft; hybrid-electric propulsion; energy management strategy; set-based design; design space exploration; optimisation; sensor errors; flight stability; trimmer; control system; air transport forecasting; Clean Sky 2; Technology Evaluator; emission modelling; fleet modelling; n/a