Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Combustion properties of spruce black liquor droplets: Sulfur-free pulping and influence of hot-water pretreatment

  • Chengcong Chen , Raimo Alén , Joni Lehto and Hannu Pakkanen
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2016-31-04-p531-540
Keywords: Spruce; Black liquor; Combustion properties; Hot-water pretreatment; Sulfur-free pulping
Published Online: 2018-07-19
Published in Print: 2016-12-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 31 Issue 4
Submit manuscript

Journal and Issue

Articles in the same Issue

Combustion properties of spruce black liquor droplets: Sulfur-free pulping and influence of hot-water pretreatment
Hydrophobization of cellophane and cellulose nanofibrils films by supercritical state carbon dioxide impregnation with walnut oil
The influence of fibrillation on the oxygen barrier properties of films from microfibrillated cellulose
Effects of cellulose micro/nanofibers as paper additives in kraft and kraft-NaBH4pulps
The Sequential Liquid-Lignin Recovery and Purification process: Analysis of integration aspects for a kraft pulp mill
Potential energy improvements in a multiple-effect evaporation system: case studies of heat recovery
Separation and recirculation of bulk crystals to potentially mitigate sodium salt scaling in black liquor evaporators
Using a Rapid-Kothen paper machine to simulate the effect of system closure on the contamination load of whitewater
A laboratory study on the use of maple CTMP and calcium carbonate fillers in fine paper production
Multi-ply forming of linerboard by successive twin-wire roll forming
Effect of refining on strength efficiency in twin-wire roll forming of never-dried unbleached softwood kraft pulp
A new test device to analyse the flow resistance and compressive behaviour of fibre mats
The effect of Dean Flow in a tube flow fractionation device
Elastic model of paper stacks by considering the paper structure
Biaxial in-plane yield and failure of paperboard
The fractal characteristic of porous coatings prepared with ground calcium carbonate
A model for moisture-induced dimensional instability in printing paper
Local network effects on hygroscopic expansion in digital ink-jet printing
Deinkability of thermochromic offset inks
Downloaded on 25.4.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2016-31-04-p531-540/html
Scroll to top button