Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter July 19, 2018

Hydrogen peroxide bleaching of mechanical pulp fines

  • Marianne Haugan and Øyvind Gregersen
From the journal Nordic Pulp & Paper Research Journal
https://doi.org/10.3183/npprj-2006-21-01-p105-110
Keywords: TMP fines; Isolation; Characterization; Hydrogen peroxide bleached; Absorption
Published Online: 2018-07-19
Published in Print: 2006-01-01

© 2018 by Walter de Gruyter Berlin/Boston

From the journal
Nordic Pulp & Paper Research Journal
Nordic Pulp & Paper Research Journal
Volume 21 Issue 1
Submit manuscript

Journal and Issue

Articles in the same Issue

INSTRUCTIONS TO AUTHORS 2006
Microscopical study on the effects of partial removal of xylan on the swelling properties of birch kraft pulp fibres
Two-dimensional wavelet flocculation analysis of fibre suspensions and paper sheets
A flow loop system for study of fibre suspension flocculation
Fibre floc behaviour of softwood kraft pulp in flowing suspensions
Fibre length effect on fibre suspension flocculation and sheet formation
Some ways to decrease fibre suspension flocculation and improve sheet formation
Simultaneous chemical and mechanical treatment of pulp fibre and the resulting changes in pulp properties
Influence of various oxidizable structures on the brightness stability of fully bleached chemical pulps
A twin-wire model gap former: Design and evaluation methods
Flow mechanism in twin-wire blade forming. Part I
Flow mechanism in twin-wire blade forming. Part ll
A flexible approach for modelling flow in multi-component blade formers
Theoretical estimates of expected refining zone pressure in a mill-scale TMP refiner
Pressure and vibration in the refining zone of a TMP refiner – influence of the fibre flow
Geometry of a high-shear slit rheometer and its effect on the correlation with the coating process
Hydrogen peroxide bleaching of mechanical pulp fines
Dynamic measurements of nip force variations during post-printing of corrugated board
The use of polyelectrolyte multilayers of cationic starch and CMC to enhance strength properties of papers formed from mixtures of unbleached chemical pulp and CTMP. Part I
The use of polyelectrolyte multilayers of cationic starch and CMC to enhance strength properties of papers formed from mixtures of unbleached chemical pulp and CTMP. Part II Influence of addition strategy, fibre treatment and fibre type
Radical coupling – A major obstacle to delignification in kraft pulping
Improving the properties of never-dried chemical pulp by pressing before refining
Hans Höglund – Mr. Mechanical Pulp Basic research resulted in Ekman Medal Award
Doctorial dissertations in the field of pulp and paper science and technology 2005
Downloaded on 23.4.2024 from https://www.degruyter.com/document/doi/10.3183/npprj-2006-21-01-p105-110/html
Scroll to top button