Abstract
Economical short-run production technologies for manufacturing blanks are proposed.
Similar content being viewed by others
References
Atroshenko, A.P. and Fedorov, V.I., Metallosberegayushchie tekhnologii kuznechno-shtampovochnogo proizvodstva (Reduced-Metal Forging and Stamping Technologies), Leningrad: Mashinostroenie, 1990.
Utkin, N.F., Kizhilev, Yu.I., Pluzhnikov, S.K., et al., Obrabotka glubokikh otverstii (Machining Deep Holes), Leningrad: Mashinostroenie, 1988.
Rozov, N.V., Proizvodstvo trub: Spravochnik (Pipe Production: A Handbook), Moscow: Metallurgiya, 1974.
Shevakin, Yu.F. and Gleiberg, A.Z., Proizvodstvo trub (Pipe Production), Moscow: Metallurgiya, 1968.
Komaishko, S.G., Kulik, G.N., Suzdal’, K.V., et al., Multifunctional Device for Preliminary Operations, Metalloobrabotka, 2008, no. 5(47), pp. 46–50.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © S.G. Komaishko, G.N. Kulik, M.V. Moisei, K.V. Suzdal’, A.Yu. Tonkonog, S.K. Pluzhnikov, 2010, published in Vestnik Mashinostroeniya, 2010, No. 9, pp. 57–58.
About this article
Cite this article
Komaishko, S.G., Kulik, G.N., Moisei, M.V. et al. Hybrid technologies in the production of manufacturing blanks. Russ. Engin. Res. 30, 904–905 (2010). https://doi.org/10.3103/S1068798X1009011X
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X1009011X