Abstract
The tribotechnical characteristics of electrospark coatings of amorphous and nanocrystalline iron alloys have been determined. The influence of the crystalline phase on the wear rate of electrospark coating has been established.
Similar content being viewed by others
References
Inoue, A., High strength bulk amorphous alloys with low critical cooling rates, Mater. Trans., 1995, vol. 36, pp. 866–875.
Inoue, A., Stabilization of metallic supercooled liquid and bulk amorphous alloys, Acta Mater., 2000, vol. 48, pp. 279–306.
Molokanov, V.Y., Petrzhik, M.I., Mikhailova, T.N., Sviridova, T.A, and Dyakonova, N.P., Formation of bulk (Zr, Ti)-based metallic glasses, J. Non-Crystal. Solids, 1999, vol. 250–252, pp. 560–565.
Kawamura, Y., Shibata, T., Inoue, A., and Masumoto, T., Superplastic deformation of Zr65Al10Ni10Cu15 metallic glass, Scripta Mater., 1997, vol. 37, pp. 431–436.
Fedotov, D.Yu., Fedorov V.A., Pluzhnikova T.N., Yakovlev, A.V., and Kuznetsov, P.M., Mechanical properties of amorphous metal alloys, Vestn. Tambov. Gos. Univ. Ser. Estestv. Nauki, 2012, vol. 17, pp. 139–143.
Fedorov, V.A., Yakovlev, A.V., and Kapustin, A.N., Effect of annealing on the kinetics of embrittlement of amorphous alloys, Metal Sci. Heat Treat., 2008, vol. 50, pp. 397–399.
Fedorov, V.A., Permyakova, I.E., and Ushakov, I.V., Effect of heat trreatment on mechanical properties of cobalt-based metallic glass, Deform. Razrush. Mater., 2005, No. 2, pp. 36–39.
Kukareko, V.A., Structural state and fracture strength upon friction of boron-containing alloys and coatings with an amorphous structure, Phys. Met. Metallogr., 2011, vol. 111, pp. 294–303.
Vereshchagin, M.N., Goranskii, G.G., and Kukareko, V.A., Structure and tribological properties of amorphous alloys based on iron and nickel, J. Fric. Wear, 2012, vol. 33, pp. 181–183.
Penyashki, T., Study of the influence of temperature on the structure of the deposited electrospark coatings, Tribol. J. BULTRIB, 2014, vol. 4, pp. 159–168.
Kuznetsov, I.S. and Khromov, V.N., Electrode for electric-spark treatment, RF Patent No. 2416499, MPK V 23 N 1/04, V 82 V 1/00. Byull. Izobr., 2011, no. 11.
Kuznetsov, I.S., Electric-spark technology of strengthening of reaper cutting apparatus details by electrodes from amorphous nanocrystalline alloys, Candidate Sci. (Eng.) Dissertation, Moscow, 2013.
Kolomeichenko, A.V. and Kuznetsov, I.S., Microhardness of electric-spark coatings from amorphous nanocrystalline alloys, Trudy GOSNITI, 2013, vol. 113, pp. 379–382.
Kolomeichenko, A.V. and Kuznetsov, I.S., Structure of electric-spark coating from amorphous nanocrystalline alloys, Trudy GOSNITI, 2014, vol. 115, pp. 161–166.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © A.V. Kolomeichenko, I.S. Kuznetsov, 2014, published in Trenie i Iznos, 2014, Vol. 35, No. 6, pp. 723–727.
About this article
Cite this article
Kolomeichenko, A.V., Kuznetsov, I.S. Tribotechnical properties of electrospark coatings of amorphous and nanocrystalline iron alloys. J. Frict. Wear 35, 501–504 (2014). https://doi.org/10.3103/S1068366614060087
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068366614060087